Search found 14 matches
- Tue May 05, 2020 5:47 pm
- Forum: Questions & Discussions Forum
- Topic: How to automate a 2112u-101 switch
- Replies: 0
- Views: 4279
How to automate a 2112u-101 switch
Hi, I just moved to a new home which has a built in led-strip in the ceiling. It can be controlled/dimmed by a wall Push-rotate-switch. I was thinking to replace a wall switch with a fibaro component. Unfortunately the component to replace was not a dimmer, but actually a potentiometer 2112u-101 wit...
- Wed Aug 24, 2016 11:19 am
- Forum: For Sale Forum (Dutch allowed)
- Topic: [GEZOCHT] RFXMeter module
- Replies: 1
- Views: 2873
[GEZOCHT] RFXMeter module
Na het vervangen van onze watermeter kan ik deze nu uitlezen met een reflectieve module van RFXMeter. Ik heb al een RFXMeter hangen met twee modules (elektra/gas). Daarom ben ik op zoek naar een extra module hiervoor. Bert had nog wel sensoren, maar helaas geen printjes meer. Is er iemand die mij mi...
- Mon May 19, 2014 8:40 am
- Forum: Rfxcom Receivers & Transmitters Forum
- Topic: Mechanical ventilation known to work with RFXCOM
- Replies: 17
- Views: 33048
Re: Mechanical ventilation known to work with RFXCOM
I use the same setup as PeterJanRoes, except I only use one KAKU switch to set the ventilation to level 3. Using home seer, I watch the output of an Oregon humidity sensor. When humidity is larger than 67%, ventilation is set to level 3, below that percentage, the ventilation is restored to the sett...
- Sun May 18, 2014 10:48 pm
- Forum: Hvac, Heating Opentherm Forum
- Topic: EvoHome open therm
- Replies: 1
- Views: 5700
EvoHome open therm
Hi, Since a week I have the evohome system (color display) partly installed. I have a display, an internet gateway and open therm module setup at this moment. Other parts are not connected yet. At the evotouch, a single zone is installed in which the evotouch measures temperature. Also the open ther...
- Thu Nov 07, 2013 11:46 pm
- Forum: Windows Forum
- Topic: rfxcom RFreciever program
- Replies: 15
- Views: 28285
Re: rfxcom RFreciever program
In wrote my own interface on the RFXCOM reciever. It is written in C#, but it logs the Signals from RFXCOM sensors in SQL server. Since the protocols used by RFXCOM are quite difficult to understand for starting programmers, it is quite hard to write a program for it. You need to have some knowledge...
- Thu Nov 07, 2013 8:45 am
- Forum: News Forum
- Topic: De beurs Domotica & Slim Wonen 2013 Eindhoven (vrijkaarten)
- Replies: 93
- Views: 518655
Re: De beurs Domotica & Slim Wonen 2013 Eindhoven (vrijkaarten)
Deze post heb ik om de een of andere reden compleet gemist.
Als er nog kaartjes zijn, kan ik er dan 2 ontvangen?
Thx!
Als er nog kaartjes zijn, kan ik er dan 2 ontvangen?
Thx!
- Sat Apr 20, 2013 4:16 pm
- Forum: Webcams & Camera Stuff Forum
- Topic: Elro C704IP camera IO input
- Replies: 0
- Views: 5282
Elro C704IP camera IO input
Hello, Since i could not find a more suitable place for camera's I post this in Mescellaneous topics. Since a few days I own a Elro C704IP wifi camera. This works very well and on motion triggers an event in my homeseer system. However, I don't want to use the camera to check for motion, but I want ...
- Mon Jul 23, 2012 1:19 pm
- Forum: X10, A10 Xanura Marmitek Forum
- Topic: X10 to wireless (reverse TM13)
- Replies: 1
- Views: 5825
X10 to wireless (reverse TM13)
Hello, Does someone know a component to convert X10 signals from the powerline to wireless (RF/S10) signals? The TM13 is said to be a tranceiver, but actually only receives wireless and does not transmit X10 signals back in the air. My current setup consists of a LAN-RFXcom tranceiver, several S10 r...
- Thu Mar 15, 2012 6:24 pm
- Forum: Rfxcom Receivers & Transmitters Forum
- Topic: KAKU not listening to RFXmitter command
- Replies: 7
- Views: 6193
Re: KAKU not listening to RFXmitter command
Unfortunately my RFreceiver does not show anything invoked by RFXmitter. Also other types of data like X-10 or ARC commands are not shown in RFreceiver, regardless of their ID's RFreceiver only shows data that is invoked by the original KAKU remote control, or my RFmeter. I am beginning to suspect t...
- Thu Mar 15, 2012 5:52 pm
- Forum: X10, A10 Xanura Marmitek Forum
- Topic: Marmitek HA810 Home Automation Module
- Replies: 2
- Views: 4412
Re: Marmitek HA810 Home Automation Module
Thank your for the reply, nice to know that there are possibilities.
Unfortunately I was looking for a wireless option, as i will have to buy another interface to pick up the X-10 signals from the electrical network again.
Unfortunately I was looking for a wireless option, as i will have to buy another interface to pick up the X-10 signals from the electrical network again.
- Thu Mar 15, 2012 4:21 pm
- Forum: Rfxcom Receivers & Transmitters Forum
- Topic: KAKU not listening to RFXmitter command
- Replies: 7
- Views: 6193
Re: KAKU not listening to RFXmitter command
RFXCom mode does not work.
- Thu Mar 15, 2012 2:57 pm
- Forum: Rfxcom Receivers & Transmitters Forum
- Topic: KAKU not listening to RFXmitter command
- Replies: 7
- Views: 6193
Re: KAKU not listening to RFXmitter command
Unfortunately that doesn't do the trick, either mode just changes the ACK statement from ACK=> 33 to ACK=> 37 in RFmitter HE Device=0666ABA Unit=3 ON ACK=> 37 Nothing is received in RFreceiver In RFReceiver I tried: RFXCOM mode, 32bit mode both in cobinatino with enable ALL RF Just for the record, m...
- Thu Mar 15, 2012 11:58 am
- Forum: Rfxcom Receivers & Transmitters Forum
- Topic: KAKU not listening to RFXmitter command
- Replies: 7
- Views: 6193
KAKU not listening to RFXmitter command
Hello, I have a KAKU ACD-1000. When switching it with the remote control, I receive the following result in RFreceifer: HE Device=0666ABA Unit 3 ON Next, i start RFXmitter, choose either RFXCOM mode with receiver connected, or without receiver connected. Now i go to the AC tab and select the next 0,...
- Thu Mar 15, 2012 11:18 am
- Forum: X10, A10 Xanura Marmitek Forum
- Topic: Marmitek HA810 Home Automation Module
- Replies: 2
- Views: 4412
Marmitek HA810 Home Automation Module
Hello, Does anybody have experience with the Marmitek HA810 Home Automation Module for a ProGuard800 system. The manuals found on the marmitek website specify some information, but a part referred to in the manual for the setup-menu seems missing. In the Neterlands we have a company called HomeSafet...