Eaton stops XanuraHome production?

by **MindBender** » Wed Jul 01, 2009 10:05 am

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by koen
 Indeed, Xanura production will be stopped in future.<hr height="1" noshade id="quote"></blockquote id="quote">
What time span are we talking about here? 10 Days or 10 years?

This is NOT good News. I have at least 3 broken modules per year, until now all covered by warrenty, but if they become scarse prices will go up.

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by koen
 System will be replaced by Moeller XComfort modules, so everything wireless over RF....<hr height="1" noshade id="quote"></blockquote id="quote">
This News is even worse: RF is a serious security risk, not to mention privacy. X10 is unreliable, but at least it's tamper proof.

In fact, my Xanura system is so unreliable that it's not usable at all. I offered Eaton to remove everything from my house and ship it back for a refund. I didn't do that because removing >35 units is a LOT of work, but if there's no future in the system it may be the most sensible thing to do.

by **RDNZL** » Wed Jul 01, 2009 11:17 am

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by MindBender
 <blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by koen
 Indeed, Xanura production will be stopped in future.<hr height="1" noshade id="quote"></blockquote id="quote">
What time span are we talking about here? 10 Days or 10 years?

This is NOT good News. I have at least 3 broken modules per year, until now all covered by warrenty, but if they become scarse prices will go up.

[quote]
In fact, my Xanura system is so unreliable that it's not usable at all. I offered Eaton to remove everything from my house and ship it back for a refund. I didn't do that because removing >35 units is a LOT of work, but if there's no future in the system it may be the most sensible thing to do.
<hr height="1" noshade id="quote"></blockquote id="quote">

Maybe that the exact reason why they stop?
Too much repair/broken modules are reported?

by **Edwin2008** » Wed Jul 01, 2009 11:25 am

so alternative all over to knx?

by **koen** » Wed Jul 01, 2009 11:27 am

nope, don't think that's the main reason. More likely because of collaboration / integration of Moeller. Won't make 2 different systems if both have "same" functionality and market approach. Xcomfort works also on "same" HCB, but has more products in range than Xanura + allready more established in more european countries. Hope they have more / same functionality now.

by **koen** » Wed Jul 01, 2009 11:31 am

can't compare KNX to Xanura / Xcomfort or others. Advantage of Xanura / Xcomfort = existing wiring / houses + less complex to program.
KNX = more expensive, more possibilities, more certain for the future, more difficult in programming, preferrable new buswiring, ...

by **Alexander** » Wed Jul 01, 2009 11:56 am

X10 is history. Come on. That's why i started all the ZWave topics. Im looking more into the Merten stuff, but it needs a 6 cm deep box. Who has those in their current house?

by **Andro** » Wed Jul 01, 2009 12:11 pm

X10 might be history (it is at least ancient), but the A10 protocol from xanura is a bit better and for most people reliable enough. I am not going to replace everything in my house because xanura is no longer available. It will be a gradual process and I am not sure what will replace it in the future. One thing about homeseer is that multiple protocols can exist together and still be called from the same application. It's a shame if you have to support multiple protocols, but it's not a problem I can't overcome.

by **RDNZL** » Wed Jul 01, 2009 1:12 pm

Don't want to pay 800 Euro for an HCB which is just a MisterHouse ripoff.

Thanks to Merdeka/Timo the next version of DomotiGa will have KNX/EIB support for EIB1 and EIB2 type devices, more are following ;-)

by **Cooma** » Wed Jul 01, 2009 6:56 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by RDNZL
 Don't want to pay 800 Euro for an HCB which is just a MisterHouse ripoff.

Thanks to Merdeka/Timo the next version of DomotiGa will have KNX/EIB support for EIB1 and EIB2 type devices, more are following ;-)

<hr height="1" noshade id="quote"></blockquote id="quote">

How about Z-wave support, that is not included in the DomotiGa. Have you tested LinuxMCE? I'm planning on using that.

by **RDNZL** » Wed Jul 01, 2009 7:47 pm

I have looked at LinuxMCE when it was called Pluto Home, found it promising, but just as clutered as Misterhouse was.

That's why I started to build something form scratch resulting in DomotiGa, maybe Z-Wave is the next protocol supported, but have to look out for not getting as much clutered as the ones I rejected because of that fact ;-)

Sorry for being a bit off topic.

by **TANE** » Wed Jul 01, 2009 10:23 pm

Xcomfort works well and is much better than A10...P2000 system was also much better than VHS.
In this open world closed system will make no chance.

I have about 50 A10 modules and 35 Plugwise and some zwave.
If I had to start from scratch what are the alternatives.

A10 (rip 2009)
Zwave (big alliance)
Ziggbee (growing...)
KXN (reliable and professional not usable for the existing buildings)
Xcomfort ???

by **Fantic** » Wed Jul 01, 2009 10:41 pm

Indeed as I already stated in another topic, in feb next year I will be starting the wiring and all electrics in my new watervilla, I was planning on Xanura, but this whole discussion has thrown this overboard [:D]
I'm glad I only bought some block filter modules for the wiring closet.

So now the real question is what's next? I specially liked the build in modules and everything fits in a 50mm wallbox.
Is there any other system supporting the same functionality? (Marmitek without status check is not a real alternative)

Regards, Maarten.
Never let a computer know you're in a hurry.

by **TANE** » Wed Jul 01, 2009 10:46 pm

If you go for zwave.
Merten
http://www.waakzaamwonen.nl/catalog/pro ... en-1voudig

Popp
http://www.ezhome.nl/index.php?main_pag ... cts_id=224

HomePro
http://www.elekhomica.nl/product_info.p ... cts_id=711

by **Digit** » Wed Jul 01, 2009 11:11 pm

You could also consider PLCBUS. I have recently increased the number of modules to 15. It works fine for me.

by **Fantic** » Wed Jul 01, 2009 11:15 pm

Enver,

The HomePro link is the same as the Popp's, however will Homeseer support the zwave devices and are the Popp switches usble with the Merten modules.... just some of the questions that pop to mind.

Regards, Maarten.
Never let a computer know you're in a hurry.

Who is online