DAIX12 acts like SAIX12

Forum about Xanura, Eaton Holec and Marmitek and other brand X10 and A10 devices.
Post Reply
michelr
Starting Member
Starting Member
Posts: 18
Joined: Sun Nov 23, 2008 10:38 pm
Location: Netherlands

DAIX12 acts like SAIX12

Post by michelr »

I have three of the fourteen DAIX12 actors who acts like a SAIX12.
They are not responding in dim-commando's buts click on and off like SAIX12. I think they have the wrong software ore label...?
Does any one now what the problem can be, de other DAIX12 working super!
User avatar
TANE
Forum Moderator
Forum Moderator
Posts: 4806
Joined: Fri Apr 06, 2007 9:46 pm
Location: Netherlands
Contact:

DAIX12 acts like SAIX12

Post by TANE »

is there soft start or just a click when turning on?
MindBender
Advanced Member
Advanced Member
Posts: 640
Joined: Sun Apr 30, 2006 5:31 pm
Location: Netherlands
Contact:

DAIX12 acts like SAIX12

Post by MindBender »

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">buts click on and off like SAIX12.<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Do they actually make a clicking sound, or do they just switch from 0% to 100% intantaneously? )As you probably know, a DAIX has a soft start and stop, so switching from 0% to 100% is supposed to take ~1sec.)

Wrong firmware is not very likely, but perhaps a wrong label?
Henk
Member
Member
Posts: 450
Joined: Sat May 06, 2006 10:54 pm
Location: Netherlands

DAIX12 acts like SAIX12

Post by Henk »

Michel,

Take the modules with you on March 6th ....

Henk
michelr
Starting Member
Starting Member
Posts: 18
Joined: Sun Nov 23, 2008 10:38 pm
Location: Netherlands

DAIX12 acts like SAIX12

Post by michelr »

Eaton change the DAIX12and the problems are gone, super!!
Post Reply

Return to “X10, A10 Xanura Marmitek Forum”