Control X10 via GSM network

Post by **nik_nak94547** » Thu Feb 19, 2009 6:13 pm

Hi there,

I'm looking for a device that allow me to control X10 using GSM network. Do you know such a GSM comunicator where to put a sim card and after call to switch on/off few X10 modules. I found on the net SC9000 console but it require landline. Unfortunatlly I don't have in my place.

Thanks for your advice,

Post by **Paul Peterson** » Thu Feb 19, 2009 6:38 pm

You need a device which emulates the line. You should use some GSM gateway. It allows phone calls in GSM network to be received with the connected to the device phone. There is a good kit here: http://x10modules.com/shop/product_info ... cts_id=109

Regards,
Paul

Great minds discuss ideas. Average minds discuss events. Small minds discuss people.

Post by **Peterpc** » Thu Feb 19, 2009 10:31 pm

http://www.marmitek.com/en/pdf/9750.pdf

It can have a GSM800 module. You can switch X-10 with it by calling the unit and pushing your phone buttons, or you can do it by sending SMS commands.

Post by **nik_nak94547** » Fri Feb 20, 2009 1:12 pm

Thanks peterpc

I checked Marmitek ProGuard800 it is nice product. Actually I placed order for SC9000 and GSM Gateway kit on

http://x10modules.com/shop/product_info ... cts_id=109

It,s more suitable for me and half price compare to ProGuard800.I will post more details after receive and test it.

Thanks Paul,

Bye

Post by **Mario** » Mon Sep 07, 2009 8:28 pm

You can also do it with this device:
http://www.domolandia.com/p348/X10-GSM- ... _info.html

It allows you to manage all 256 X-10 adresses and works pretty well. Also it has 3 relays, internal thermostat, ...

Post by **Edwin2008** » Mon Sep 07, 2009 9:17 pm

Sorry spanish is not my best language