Re: Ledcontroller H801 upgraded MQTT from Aliexpress
Posted: Fri Apr 29, 2016 5:08 pm
This is my first attempt to program H801 and my first experience with Arduino IDE so i might be doing something wrong. But the eryk.io was written successfull and i think the current INO is to difficult to read for me because of al vlast3k devices in one .ino file. Please give us a manualvlast3k wrote:aahh sorry....raymonvdm wrote:Using this interface i just got the example op eryk.io working. But i cannot build the vlast3k .ino yet
we have now easter and I will have finally time to add a description how to build
Code: Select all
Arduino: 1.6.8 (Linux), Board: "Generic ESP8266 Module, 80 MHz, 40MHz, DIO, 115200, 1M (256K SPIFFS), ck, Disabled, None"
Build options changed, rebuilding all
sketch/vThingCO2.ino.cpp.o: In function `printVersion()':
/home/calimero/Arduino/vThingCO2.ino/vThingCO2/vThingCO2.ino:271: undefined reference to `handleWifi()'
/home/calimero/Arduino/vThingCO2.ino/vThingCO2/vThingCO2.ino:271: undefined reference to `processUserInput()'
sketch/vThingCO2.ino.cpp.o: In function `activeWait()':
/home/calimero/Arduino/vThingCO2.ino/vThingCO2/vThingCO2.ino:271: undefined reference to `handleWifi()'
sketch/vThingCO2.ino.cpp.o: In function `operator<< <char const*>':
/home/calimero/Arduino/libraries/Streaming/Streaming.h:34: undefined reference to `processUserInput()'
sketch/vThingCO2.ino.cpp.o:(.text.setup+0x18): undefined reference to `h801_setup()'
sketch/vThingCO2.ino.cpp.o: In function `setup':
/home/calimero/Arduino/vThingCO2.ino/vThingCO2/vThingCO2.ino:282: undefined reference to `h801_setup()'
sketch/vThingCO2.ino.cpp.o: In function `operator<<':
/home/calimero/Arduino/libraries/Streaming/Streaming.h:103: undefined reference to `handleOTA()'
/home/calimero/Arduino/libraries/Streaming/Streaming.h:103: undefined reference to `h801_loop()'
sketch/vThingCO2.ino.cpp.o: In function `operator<< <const __FlashStringHelper*>':
/home/calimero/Arduino/libraries/Streaming/Streaming.h:34: undefined reference to `handleWifi()'
sketch/vThingCO2.ino.cpp.o: In function `operator<<':
/home/calimero/Arduino/libraries/Streaming/Streaming.h:103: undefined reference to `handleOTA()'
sketch/vThingCO2.ino.cpp.o: In function `loop':
/home/calimero/Arduino/vThingCO2.ino/vThingCO2/vThingCO2.ino:333: undefined reference to `processUserInput()'
/home/calimero/Arduino/vThingCO2.ino/vThingCO2/vThingCO2.ino:363: undefined reference to `h801_loop()'
collect2: error: ld returned 1 exit status
Multiple libraries were found for "NeoPixelBus.h"
Used: /home/calimero/Arduino/libraries/NeoPixelBus
Not used: /home/calimero/Arduino/libraries/NeoPixelBus_uart
exit status 1
Error compiling for board Generic ESP8266 Module.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.