Hi all,
i have a device that can be controlled by a com(rs232) cable (rj25, 2 wires for data).
i would like to be able to connect to that trough zigbee,rf,or any other wireless technology.
does anyone know how to accomplish this?
kind regards,
John
Com-port to wireless
Re: Com-port to wireless
Could it be done with this one?
https://www.antratek.nl/xbee-explorer-serial
(in Dutch, I'm afraid, but I bet there's a English site where it can be found as well).
best,
marcelr
https://www.antratek.nl/xbee-explorer-serial
(in Dutch, I'm afraid, but I bet there's a English site where it can be found as well).
best,
marcelr
Re: Com-port to wireless
Do you really need the RS232 voltage levels, or can you also use TTL? In that case you can take a look to an ESP8266 module and a firmware like "Serial Transparent Bridge" (or put a MAX232 in between).
Antratek has also a commercial off-the-shelf solution available btw.
Antratek has also a commercial off-the-shelf solution available btw.