L & G's
I was wandering if anybody has experience with connection milights directly (without RFlink gateway, arduino mega) to the raspberry using the software of this german guy. I installed the stuff without any problems and now I need to now how to create the devices triggering scripts or something sending the commands to the milight bulbs via the nRF24 with Domoticz.
torsten-traenkner.de/wissen/smarthome/o ... ilight.php
thx in advance
willem
Domiticz with openmilight / raspberry / nRF24 (milight)
Moderator: Mversluis
Domiticz with openmilight / raspberry / nRF24 (milight)
Platform: Raspberry PI 3 with Domoticz, Connected devices: Open Therm Gateway with ESP-12 wifi-bridge
Re: Domiticz with openmilight / raspberry / nRF24 (milight)
No, but why go to so much troubles, the ,Milight has a Lan/wifi controller which is supported by Domoticz
Re: Domiticz with openmilight / raspberry / nRF24 (milight)
I know that but I've read the wifi bridge is somewhat unstable and it only allow s for 4 groups / bulbs and it saves me another device connected to the wifi network.
Platform: Raspberry PI 3 with Domoticz, Connected devices: Open Therm Gateway with ESP-12 wifi-bridge