Creating my own OTGW firmware for the NodoShop version
Moderator: hvxl
Re: Creating my own OTGW firmware for the NodoShop version
Just to be clear: It is possible to upgrade the firmware on a PIC16F88 using ESP firmware 0.9.5, but only via the built-in upgrade mechanism. Upgrading the PIC firmware using OTmonitor via port 25238 does not work. So I advise to use the upgrade feature of the ESP firmware. Then you don't have to disconnect the OTGW to upgrade the PIC firmware to 5.7.
Schelte
Re: Creating my own OTGW firmware for the NodoShop version
I used the old Nodoshop software together with the old OTGW having an ESP8266.
I could set an override temp from Domoticz easily.
After I flashed your software ( amazing job) I get all devices available in Domoticz but cannot set een overrule temp.
Mqtt explorer reflects a set command but OTMONITOR does not receives this data.
Note that from Otmonitor I can, as always, set an override temp.
Do I overlook a setting in your software?
TIA
Bart
I could set an override temp from Domoticz easily.
After I flashed your software ( amazing job) I get all devices available in Domoticz but cannot set een overrule temp.
Mqtt explorer reflects a set command but OTMONITOR does not receives this data.
Note that from Otmonitor I can, as always, set an override temp.
Do I overlook a setting in your software?
TIA
Bart