Infrequent room temperature measurements
Posted: Sun Feb 18, 2024 12:02 pm
I am attempting to build my own heating control system, and want to use OTGW as a key tool for this. I just installed the OTGW and the Honeywell Lyric T6 thermostat (both new), and it seems the OTGW and thermostat are working fine.
However, the room temperature data I get from the OTGW does not change very often, only once per 20 minutes to once per hour (not in a regular pattern). Any ideas how to fix this?
I do see room temperature messages from the thermostat every minute or so, but the value itself usually does not change.
I'm using the Nodoshop OTGW with firmware 6.5, Demos W1 firmware 0.10.2. I can see the issue with both the OTMonitor and MQTT (both WiFi). The lyric T6 has two devices, the thermostat and a "boiler box". I connected the OTGW between the boiler and "boiler box", not between the boiler box and thermostat.
However, the room temperature data I get from the OTGW does not change very often, only once per 20 minutes to once per hour (not in a regular pattern). Any ideas how to fix this?
I do see room temperature messages from the thermostat every minute or so, but the value itself usually does not change.
Code: Select all
10:53:53.538898 T90181430 Write-Data Room temperature: 20.19
10:53:53.540487 B50181430 Write-Ack Room temperature: 20.19