DAIX12 refusing to switch on

Forum about Xanura, Eaton Holec and Marmitek and other brand X10 and A10 devices.
Post Reply
MindBender
Advanced Member
Advanced Member
Posts: 640
Joined: Sun Apr 30, 2006 5:31 pm
Location: Netherlands
Contact:

DAIX12 refusing to switch on

Post by MindBender »

In my system I have several DAIXs and one DAIX12. This DAIX12 regularly (~once a month) refuses to switch on the lights when I press the button. But when I press and hold the button, the lights <i>do</i> dim up and after this procedure everything works as expected again.

At first I accused my girlfriend of switching of the lights by pressing and holding the button, hence dimming it to 0% and making 0% the dimming preset.

Now my girlfriend is operating the switches properly, it seems that the DAIX12 module is resetting its preset dimming level to 0% by itself every now and then. This is probably a bug, but it may be a defect as well. (Un)fortunately I only have one module, so I have no reference.

Does anybody else experience similar behavior on a DAIX12 module?
Post Reply

Return to “X10, A10 Xanura Marmitek Forum”