mo046 wrote:Devices should be created automatically if they don't exist.
But what script command should i use in the events ? It seems to be missing the devices
mo046 wrote:Devices should be created automatically if they don't exist.
Code: Select all
okt-19 21:35:14 Error SendMessage; OTGW: Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
Code: Select all
17:13:47.751246 T00110000 Read-Data Relative modulation level: 0.00
17:13:48.195243 Command (via relay server, from 192.168.110.35:53460): PS=1
17:13:48.205398 PF
17:13:48.344238 00000010/00000000,10.00,00000011/00000001,0.00,0/0,16.50,115.00,0.00,17.64,52.00,0.00,0.00,0.00,65/0,0/0,0.00,0.00,0,0,0,0,0,0,0,0
17:13:49.718215 Command (via relay server, from 192.168.110.35:53470): PS=1
17:13:49.733602 PF
17:13:49.873006 00000010/00000000,10.00,00000011/00000001,0.00,0/0,16.50,115.00,0.00,17.64,52.00,0.00,0.00,0.00,65/0,0/0,0.00,0.00,0,0,0,0,0,0,0,0
17:14:00.410559 Command (via relay server, from 192.168.110.35:53483): PS=0
17:14:00.433993 OK
17:14:01.026904 T80190000 Read-Data Boiler water temperature: 0.00
17:14:01.229875 BC0193400 Read-Ack Boiler water temperature: 52.00
I'm finally started the migration to HS3 as well. I'm glad others (Maurice, yola)? did rework my HS2 script to HS3, very nice!! Reading status from OTGW is working fine, but It looks I have the same issue as raymonvdm; I can't override the temperature via HS3 device where it works perfect via ot monitor program. Does anyone have a solution for this already?raymonvdm wrote:I have a Honeywell Round Modulation and if send TC=17.0 it is working fine. The issue seems to be related to the values set on the virtual devices "Temperature Override" and "Temperature Overide Mode" they are not sent to the gateway by the script. I have set the override mode to "Constant" (I think this is TC) and the temperature to "18" but it never changes for 19 to 18. The 19 is set manual on the Honeywell.
The honeywell support .5 setpoint and the script is not, so i think the needs to be adjusted as well