The work for Domoticz has gone fast the last months.
Etc...
Code: Select all
Version 1.0.xxxx (March xxth 2014)
- Implemented: Initial Support for Forecast.io
- Implemented: Temperature/Weaher widgets forecast button if hardware is WU/Forecast.io
- Implemented: Widgets now turn yellow (if no timeout) if the battery level is <= 10 percent
- Implemented: Temperature Month/Year graphs now display min/max as a range
- Implemented: Temperature Month/Year graphs now displays Average Temperature
- Fixed: Scene/Group editor now displays Level is the first light/switch supports it when entering the page
- Changed: Raspberry Pi temperature reporting intern. (should save an extra return in the log output)
- Changed: Mobile Dashboard now uses buttons to toggle state
- Implemented: EnOcean ESP2 (TCM-120) support for On/Off/Dimmer,Temperature,Humidity and LightSensors
- Changed/Fixed: OTGW TCP/IP working now
- Implemented: OTGW, option to specify outside temperature sensor (hardware setup)
- Implemented: OpenZWave, option to configure node list settings
- Implemented: OpenZWave, option to delete failed nodes
- Changed: All external hardware sensors without RF now reports rssi level 12
- Implemented: Option to display temperature in Fahrenheit
- Fixed: Razberry, problem with door sensors
- Implemented: Charts have now a dropdown option, export to CVS
- Implemented: Option to control Meiantech security status
- Implemented: Light Log, Arm/Disarm/Motion/No Motion now also visible in graph
- Implemented: OpenZWave, option to include/exclude nodes, support for windows COM port numbers greater then 9
- Fixed: Razberry, supports now devices with multiple switches (SENSOR_BINARY)
- Changed: Other method to retrieve raspberry pi temperature
- Implemented: Option to specify S0 Meter serial baudrate
- Implemented: Slovak translation (Thanks to marek786 !)
- Implemented: Weight Scale now includes a digit in the graphs
- Implemented: Pushover notification support
- Implemented: Thermostat3 Support (Mertik)
- Implemented: Support for P1 Cables with baudrate 115200
- Fixed: Limitless/AppLamp problem
- Fixed: Pushover test option in the settings page
- Implemented: Dashboard tiles can now be ordered for room-plans
- Implemented: Allow interactive emulation of X10 sensors
- Implemented: Switch On/Off actions can now also be used from outside domoticz (for instance using them to an actual remote control)
- Implemented: P1/Counter log, Previous year in charts
- Changed: Temperatures are now valid till 380 degrees
- Implemented: P1/Gas/Counter log, report charts
- Changed: no more hour:minute in month/year graphs
- Fixed: OTGW, dunit was not set
- Implemented: Support for Remote Control buttons (On action Only!)
- Changed: Lots of work on charts plotting
- Implemented: Initial Support for SolarEdge Inverters (SE5000 and similar with TCP/IP interface)
- Implemented: Initial Support for SMASpot compatible solar Inverters
- Implemented: Option to Enable/Disable Widget Re-Ordering (settings page)
- Fixed: OpenZWave fixed possible problem with Alarm Level/Flood/Smoke/Heat value changes
- Implemented: Razberry COMMAND_CLASS_THERMOSTAT_MODE (0/1)
- Implemented: Razberry COMMAND_CLASS_SCENE_ACTIVATION (push on button) on Instance_0
- Implemented: jsonp support
- Implemented: Web Frontpage Example
- Implemented: Blinds Percentage switch type (Fibaro rollershutter)
- Implemented: Bulgarian translation (Thanks to Tommit!)
- Implemented: Razberry Voltage/Ampere
- Changed: ZWave, Power sensors that does not transmit usage, now used as power instead of usage
- Fixed: Problem in requesting devices when a Voltage device was queried (after this device no more where retrieved)
- Implemented: New General Voltage devices with 3 decimals
- Implemented: Script parameters for Light On/Off actions
- Implemented: openzwave Voltage/Ampere
- Implemented: SMASpot, voltages, efficiency, Hz and Bluetooth signal strength
- Implemented: SMASpot, accepting windows edited configuration lines!?!!...
- Implemented: SMASpot, Temperature
- Implemented: OTGW, status switches
- Implemented: Portuguese translation (Thanks to maluko!)
- Implemented: Report for RFXMeter Water
- Updated: Highcharts 3.0.10
- Implemented: Thermostat 3 (Mertik) now visible on dashboard
- Fixed: Shortlog cleanup for Percentage/Fan
- Removed: Unused Save/Delete buttons in edit Scene/Group
- Implemented: Norwegian translation (Thanks to Sungrazer!)
- Changed: Translation Language Loading
- Implemented: protection option for light/switches/scenes/setpoints
Version 1.0.1396 (January 18th 2014)
- Implemented: new commandline option to specify www root folder (-wwwroot)
- Implemented: Limitless/AppLamp, option to set Hue/Brightness in the Edit option
- Implemented: Limitless/AppLamp, can now also be used as 'Dimmer'
- Implemented: Limitless/AppLamp, can now be set to a defined color in scenes/groups/timers
- Fixed: Device/Scene/Group names can now included special characters like %
- Fixed: Edit Users, right combobox did not correctly update when selecting a user
- Fixed: User Devices for Users that did not have 'Shared' rights
- Fixed: Hardware Settings, Domoticz remote server port display
- Changed: Contact notifications now says 'Open/Closed' instead of 'On/Off'
- Fixed: Commandline option for linux now ignores slash character /
- Implemented: various improvements to have Domoticz compile in VS2010 straight from the repository
- Implemented: Windows installer option to install as service (for server implementations, no icons will be installed)
- Implemented: www port can be specified in windows installer
- Implemented: OpenZWave, now possible to set Node configuration settings
- Fixed: Day string logging for the DT1 - RTGR328N device
- Implemented: Dashboard, clicking on a Motion/Dusk/Rain sensor icon will display the log
- Fixed: RFXtrx hardware can now also be compiled/used accross big-little endianess systems
- Implemented: Windows, Support for OpenHardwareMonitor supplied sensor data in Windows version of Domoticz. See wiki for info. If you see a hardware device "Internal sensors", please delete it. The correct one to use is "Motherboard".
- Fixed: Hardware started/stopped state, should fix the double starting of hardware
- Fixed: Fixed problem with lux day value
- Implemented: Option to delete data point from sensor by Shift-Left click on short log for temp/uv/lux/usage graphs
- Implemented: New 1-Wire system (thanks to S�bastien)
- Fixed: Scene/Group timer editing (specified days was incorrectly handled)
- Implemented: Initial support for RGB driver TRC02
- Fixed: Autobackup
- Fixed: Endianess problems
- Implemented: New 1-Wire system (Thanks to Sebastien!), Kernel users have to transfer old sensors to new ones (device id is swapped in hex)
- Fixed: PiFace hardware port notation
- Fixed: I2C BMP085 hardware port notation
- Updated: Highcharts 3.0.7
- Implemented: Option to specify On/Off actions for lights/switches (http/script)
- Fixed: LightWaveRF dimming
- Changed: Smoke Detector reset button now gray when there is no panic, purple when there is
- Implemented: Application Settings, option to enable/disable adding of new hardware/devices (For example to disable newly received RF hardware)
- Implemented: Polish translation (Thanks to Jastrzi !)
- Fixed: URL encoding in Edit Light/Switch
- Implemented: Creation of 2 new database parameters in DeviceStatus
- Implemented: Creation of auto backup folders
- Fixed: Level dropdown now hidden in Scene/Groups for RGB devices
- Implemented: Prowl/NMA notification priority (not in Lua/Blockly yet)
- Implemented: Russian translation (Thanks to kur1977)
- Implemented: Ignoring negative WU rain/uv/visibility values
- Fixed: openharwaremonitor drifting WMI id's. Please delete all previous ohwm devices and select the new ones with slash paths in the id.
- Implemented: day & nighttime boolean variables in Lua
- Implemented: Notification Priority in Lua/Blockly
- Fixed: Switch On/Off action deletion
- Implemented: Implemented RisingSun manual add light/switch option
- Changed: Door Lock/Contact switch type now also handles 'Set Group Level'
- Fixed: Rego6XX counter logs did not work
- Implemented: Security Panel delay
- Implemented: Dummy hardware, option to add counter/electric sensors
- Implemented: Blockly/Lua, Send Email notification to
- Fixed: OWFS Windows, Counter(s)
- Implemented: Prevent multiple windows instances from running
- Fixed: OpenZwave for windows release build
- Fixed: Notifications for Rego6XX status (switches) were not working
- Implemented: OpenZWave Controller node configuration (PollInterval)
- Implemented: Initial support for EnOcean hardware (Only ESP2, protocol V2) at the moment, and switches only
- Changed: Log file will append, not deleted when domoticz is restarted
- Implemented: gzip compression for web traffic
- Fixed: Usage/Meter (year/month) did not report correctly for values older then one year (not also uses less web traffic)
- Changed: S0Meter extended for devices with 5 wires
- Updated: Highcharts 3.0.9, JQuery and JQueryUI
- Fixed: Transfer dialog did not show correct title in front of destination device
- Implemented: P1 Smart meter, counter values in report
Version 1.0.1186 (November 16th 2013)
- Fixed: rain week log, some top legend values did not show on the chart
- Implemented: Counterlog, Week chart, legend values
- Implemented: Room Plan editor, dashboard room selector
- Implemented: Razberry, support for switch only devices (will be reported to controller NodeID)
- Changed: ByronSX now uses the sound type as Unit ID
- Implemented: Option for each timer type to enable 'Randomness'
- Implemented/Changed: Scenes 'Learn' command will now listen to the status (pressing On/Off/Mood)
- Changed: Room Plan editor, now allows to assign devices to multiple rooms
- Implemented: Camera Setup, Streaming Icon
- Implemented: Dashboard/Lights/Scenes now displays a webcam icon when used in a Camera Setup
- Fixed: Creating a virtual device when there where no devices in the system did not work
- Implemented: Room Plan editor, now possible to add Scenes/Groups
- Changed: Lua scripts, now only works when file ends with .lua
- Implemented: Option to enable/disable menu tabs per user
- Implemented: Dim levels in steps of 5%
- Fixed: Notifications (NMA) was not send if the API key contained spaces
- Fixed: Siren Switch type can now be switched on/off
- Changed: Lua example scripts now in UTF8
- Implemented: Solar Radiation for Davis
- Fixed: Enable/disable menus for remote admin users
- Implemented: CM180i, now also displaying total usage
- Implemented: Room Selector now also vissible on mobile devices
- Fixed: Editing (changing the name) of security devices
- Implemented: Added Visibility/Solar Radiation to Lua scripts
- Implemented: Razberry Smoke Alarm
- Changed: Rain values will now update in realtime (was every 5 minutes)
- Implemented: Added otherdevices_dewpoint to Lua scripts
- Implemented: Added otherdevices_rain to Lua scripts
- Implemented: Added otherdevices_rain_lasthour to Lua scripts
- Implemented: Added otherdevices_uv to Lua scripts
- Implemented: Added otherdevices_winddir to Lua scripts
- Implemented: Added otherdevices_windspeed to Lua scripts
- Implemented: Added otherdevices_windgust to Lua scripts
- Implemented: Rain, Short Log in graph
- Implemented: Teleinfo UDF French power meter
- Implemented: Livolo hardware supported (switches/dimmers)
- Implemented: BBQ hardware supported (Maverick ET-732)
- Fixed: Random Timer interval in the setting page was not stored
- Implemented: Dashboard, clicking on Energy/P1 Smart Meter/Lux icons displays the log
- Implemented: Hardware type list is now sorted
- Fixed: Possible problems when adding a manual switch (Invalid Switch ID message)
- Implemented: New Version notification with version info, and option to review the latest changes
- Implemented: Added more log buttons to the devices tab
- Implemented: Rollertrol now displays a stop button
- Changed: Added leading zero's in the Power/Gas reports for the months (work around)
- Implemented: Transfer Temp/Temp+Hum now possible between different subtypes
- Implemented: OpenZWave initial support (Aeon USB Stick V2), with Temp/Hum/Lux/Power/Energy/Switches
- Implemented: Alecto SA30 smoke detector hardware support
- Implemented: Oregon EW109 Temp+Humidity sensor support
- Implemented: Revolt Power meter hardware support
- Implemented: Limitless/AppLamp/WifiLedLamp (with Wifi Hub) hardware support
- Implemented: Clicking on the security-panel icon in the dashboard/switch tab brings you to the actual security panel
- Implemented: Option to manual add a ByronSX doorbell
Version 1.0.1087 (Oktober 16th 2013)
- Implemented: Login page (solves the caching problems)
- Fixed: buttons add sensor/switch buttons now hidden for 'viewer' users
- Implemented: option in settings for basic-auth login type
- Changed: Logout button now placed under setup for users with admin rights
- Changed: Soil Moister sensor type moved as subtype of general sensors
- Implemented: Leaf Wetness sensor
- Changed: Removed actual meter values for meters sensors in dashboard, only usage/return is displayed
- Implemented: Option to specify local networks with mask (192.168.0.0/24, 192.168.0.10/32)
- Fixed: non admin user devices view (was only working correct for user with ID=1)
- Implemented: Temperature Dewpoint in custom graph
- Fixed: Camera special video/image url characters
- Implemented: P1 Smart Meter electra, Report view
- Changed: New splash screens for iOS
- Changed: Dutch translation, and added extra TO field
- Implemented: Report view for: P1 Smart Gas electra, CM119/160
- Implemented: Web Update now also supported for armv7l systems (cubieboard2)
- Changed: P1 Smart Meter Energy, removed Actual as it is displayed in Big
- Changed: P1 Smart Meter Gas, added Today value in Big
- Implemented: Option to Restart/Shutdown the system
- Implemented: Option to update to Stable or Beta versions
- Changed: webupdate for armv7l (cubieboard2)
- Implemented: time safeguard (for systems without RTC)
- Implemented: Swedish language support (thanks to the community!)
- Fixed: 1Wire illegal temperature (exactly 85 degrees)
- Implemented: 1Wire Voltage support on Utility/Dashboard
- Fixed: P1 Smart Meter Electra Utility refresh value for meters with return supply
- Fixed: Cost reports where meter had no previous month
- Fixed: Razberry Dimmer On/Off command
- Implemented: WU, extra protection for wind speed/gust
- Changed: iPhone/iPad shortcut icon
- Implemented: Raspberry Pi camera parameters
- Fixed: Baro meter temperature graph keep showing loading effect
- Fixed: P1 Smart Meter power, now reports 0, when timeout
- Fixed: Rain week chart (caused by new highcharts version)
- Implemented: Logging RFXSensor AD/Volt
- Fixed: Eventsystem, ampersands in OpenUrl not stored in database
- Fixed: Eventsystem, problem where inactive event would still trigger when multiple events apply
- Implemented: Eventsystem, Comma now supported in event OpenURL
- Implemented: Eventsystem, Events now triggered by security state change implemented script_security_name.lua for sec panel triggers in lua.
- Implemented: Local hostname now automatically included in Local Network setup
- Implemented: RFXSensor Voltage, Log/Notifications
- Implemented: S0 Meter USB
- Changed: Dutch translation, now UTF8 based
- Implemented: Security Panel status now in device list
- Implemented: Chime Byron SX
- Implemented: Alecto WS1200 (Temp+Rain sensor)
- Fixed: Light/Dimmer status when switching groups
- Implemented: Dashboard, clicking on the Temperature/UV/Wind/Rain/Baro/Lux icons displays the log
- Implemented: Temperature Average is now being logged, needed later for Degree Days
- Implemented: Eventsystem, Utility Device support for Energy,Gas,AirQuality,RFXSensor(Volt/AD),RFXMeter
- Changed: Dashboard Smart meter display in mobile mode
- Implemented: Scenes/Groups device ordering
- Changed: RFXCOM mode setup, RFU5 -> ByronSX
- Fixed: Shortlog History days display when showing graph from dashboard
- Fixed: Security devices always showing as switchtype 0
- Implemented: Notification intervals extended
- Implemented/Fixed: HTML5, New Alert/Confirmation system to solve iOS issue
- Fixed: devicechanged values in lua incorrect for humidity and barometer
- Fixed: Typo's in SQLHelper.cpp
- Implemented: Option to create virtual sensors for dummy hardware (hardware tab)
- Fixed: Chime (ByronSX) when turning on manualy inside domoticz
- Changed: Now letting SQLite calculating the date/time for clearing up the short-log
- Fixed: EventSystem, Calling internal URL from within blocky resulted in a unresponsive system (deadlock)
- Implemented: Started with custom icons for On/Off switches
Version 1.0.940 (July 31th 2013)
- Implemented: Lighting2, when a Group On/Off is received, all switched with the same ID will be set to 'On' or 'Off' (internally)
- Fixed: Z-Wave, Wattage scale factor was not initialized
- Implemented: Application settings, mobile view (mobile, or as normal dashboard), iPhone will always be mobile theme
- Implemented: Wind Speed Unit option (m/s, km/h, mph, knots)
- Fixed: Notification for internal combined temp/hum sensors (La Crosse TX3)
- Implemented: Moisture Sensor (for example from Davis)
- Fixed: Wind Speed/Gust should now be translated
- Implemented: Initial Support for Weather Underground sensors
- Implemented: Add manual switch support for Lighting1/Energenie
- Changed: Weather Underground updates now every 15 minutes
- Fixed: Users with old event table could have a crash when starting domoticz
- Fixed: Set RFXCOM mode, Visonic was not working
- Implemented: Visibility Sensor (for example from Weather Underground)
- Changed: Weather Underground updates now every 10 minutes
- Fixed: possible curl bug when DNS timeouts
- Implemented: Scenes, now have an On/Off button
- Implemented: Scenes, Dimmer Level
- Fixed: Drag/Drop of devices
- Fixed: YouLess day measurement
- Implemented: Z-Wave, thermostat SetPoint
- Implemented: Dew Point calculation for sensors with Temperature + Humidity
- Changed: Last xx hours/days graph, Only Gas/Electricity sensors with same previous value will be ignored
- Implemented: Spanish language support (thanks to the community!)
- Implemented: Dew Point notifications
- Implemented: Dew Point logging (not visible yet!)
- Implemented: Razberry (Z-Wave), thermostat/light/temp/hum battery status
- Implemented: Graph tooltips day of week translation
- Fixed: Temperature graphs legend translation
- Fixed: 'No Update Available !' translation
- Fixed: Temperature graphs tooltip unit
- Removed: Device Type on Temperature/Weather tab
- Fixed: YouLess meter structure
- Changed: Dim Slider for mobile items now smaller
- Fixed: Scenes table now includes pagination at the bottom
- Implemented: Raspberry Pi camera
- Implemented: JSon, updating device based on idx (json.htm?type=command¶m=udevice&idx=123&nvalue=1&svalue=2)
- Fixed: WU rain sensor (will have a new sensor type, old one needs to be removed)
- Implemented: device name in scripts calls (6th parameter)
- Implemented: Security Panel
- Implemented: Temperature tab, translated speed,gust and chill
- Implemented: Solar Radiation Sensor (for example from Weather Underground)
- Implemented: Dummy hardware device, that does nothing, but can be used for virtual switches
- Implemented: New Scene/Group functionality
Version 1.0.762 (July 1th 2013)
- Changed: Motion Sensors, Off delay now sends 'Off' to Lighting 1/6 devices, and 'No Motion' to X10 motion sensors
- Implemented: On/Off switches, Off Delay option
- Implemented: BMP085 I2C sensor (Rasberry Pi/arm only)
- Fixed: Sharing of Voltcraft,Razberry,BMP085
- Implemented: BMP085 altitude display
- Implemented: BMP085 Possible forecast, still need exact method
- Implemented: Blinds Stop button
- Fixed: Setup dropdown, users/notifications selection highlight
- Implemented: Global hardware sharing system (application settings, user manager)
- Implemented: Shared clients can now control switches
- Fixed: Some RFXCOM protocols could not be set in the hardware setup (Meiantech,Visonic,FS20,RSL)
- Implemented: Latest RFXCOM SDK (#67)
- Changed: Wind Station LaCrosse WS2300 will not display 'gust' any more
- Fixed: Ampersand in name could cause domoticz to go in endless loop
- Fixed: CM119/160/180 Energy Usage values
- Implemented: Initial language translation
- Implemented: German language support (thanks to the community!)
- Fixed: Hardware Setup, the selected existing hardware could not match with the hardware type dropdown
- Fixed: Hardware Setup, Mode button for RFXCom back again
- Fixed: CM119/160/180 Energy daily values (for readers with a very high counter)
- Implemented: French language support (thanks to the community!)
- Fixed: Notification translations
- Implemented: Lighting2, when a Group Off is received, all switched with the same ID will be set to 'Off' (internally)
- Implemented: Z-Wave Temp/Humidity sensor
- Changed: Wind Station LaCrosse WS2300 will again display 'gust'
- Changed: WindType5 (WS2300) will not display speed in widgets
- Implemented: Lux Meter Type (Currently used by Z-Wave hardware)
- Implemented: X10 Security Arm/Disarm from dashboard/switches tab
- Removed: Altitude from BMP085 sensor
- Implemented: X10 Security Remote Arm Home/Arm Away prompt
- Fixed: Possible read error for YouLess devices (extra space in front of total power)
- Fixed: Camera Snapshot emailing
- Implemented: Scenes can now be re-ordered (dashboard/scenes tab)
- Implemented: Dimmer devices keep there dim value when not setting the level (on/off)
- Implemented: Italian language support (thanks to the community!)
- Implemented: User now sees only allowed devices
- Implemented: X10 Security Remote, When status is 'Panic' the alarm can now be disarmed
- Implemented: Now possible to switch remote hardware
- Changed: Only RAEX blinds will not show a 'stop' button
Version 1.0.666 (May 28th 2013)
- Implemented: Settings, Doorbell could be send as 'Group On' or 'On' command
- Fixed: Power Usage Graph, Problem with other devices then P1 Smart Meter
- Implemented: Settings, Option to specify P1 Smart Meter Type (with/without Decimals)
- Implemented: User Editor
- Implemented: Settings Email, option to send camera snapshots as attachment
- Implemented: Enabled Timer support for Push On/Off light/switch devices
- Implemented: 1-Wire sensor support (temperature at the moment, w1-gpio, w1-therm) see Wiki pages
- Implemented: 1-Wire OWFS sensor support, see Wiki pages
- Implemented: Clicking on the version number now displays the history file
- Fixed: Data for the last selected day in the custom short term graph was not shown
- Changed: 1-Wire OWFS, ignoring ID=0 when temp is also 0
- Fixed: Light/Switch type 'Door Lock' on Lights tab showed initially a wrong icon for the 'Open' state
- Fixed: Settings Email, now possible to send a test email without username/password
- Implemented: Option to enable/disable menus from application settings
- Implemented: Option to request list of all timers via JSON (gettimerlist)
- Implemented: Option to send Notifications (Setup -> More options)
- Implemented: Option to backup database (Setup -> Application Settings left menu)
- Fixed: notification.png now included in SVN (caused browser cache problems)
- Changed: Door bells do not display a status message anymore
- Changed: Web users not loaded when no Application Settings admin account is specified
- Fixed: Voltcraft C020 value reading corrected for little endian systems
- Changed: Reorganized main menu
- Implemented: Devices Overview, added device Idx
- Changed: generic little endian detection algorithm
- Implemented: 1-Wire startup delay
- Implemented: Application Settings, Notification Interval for Sensors/Switches
- Implemented: support for 1-Wire with hubs
- Implemented: 1-Wire Humidity sensors
- Implemented: 1-Wire aux sub-folders
- Changed: command line parameter -logfile is not -log (do not enable logging, only if needed, use the application log viewer)
- Fixed: Switched tab, initial Push-On icon was set to off
- Fixed: Windows installer now includes scripts folder
- Fixed: Light Log graph, "Group Off" now seen as Off
- Changed: meta viewport, removed device-width option
- Implemented: Blinds now always have open/close buttons
Version 1.0.607 (May 11th 2013)
- Changed: Rego6XX Type setting moved to the hardware settings in the same way as RFXtrx setup is done
- Removed: patch for 'Better day value calculation' for multimeter devices (Like P1 Smart Meter electra), not needed
- Fixed: TE923 (Weather stations) hardware can now be shared
- Fixed: Push On delayed Off was deleted from queue, and was being send
- Implemented: Latest RFXCOM SDK (#66)
- Implemented: when a light/switch is pressed an optional script can be started (see scripts/readme.txt)
- Fixed: background scripts now outside of mutex (could cause a lock)
- Changed: Normal script calls should now use the 'params' option for parameters
- Fixed: Scene 'Learn' code option can now be used with already known switches
- Fixed: webgui update auto restart (caused by script changes)
- Implemented: Email Notifications
- Implemented: Email now via Curl library
- Implemented: Experimental Light Log graph
- Implemented: IP-Camera setup, and option to send email for light/switch/scene (email setup via application settings)
- Implemented: Email setup test button
- Changed: Notification text 'Greater then' changed to 'Greater Than'
- Implemented: 5th parameter for light/switch script (full status descriptor)
- Fixed: PushOn button Off delay time now handles values above 255
- Implemented: Push On switch type On/Off icon
- Changed: LightwaveRF inline relay, "Open inline relay" now seen as "On"
- Implemented: Razberry (Z-Wave) switch support
- Implemented: Email notifications now send in background
- Implemented: Light/Switch notification On/Off type
- Implemented: Option to enable/disable sending Emails in Notification Alerts
- Fixed: Email now being send with UTF-8 encoding
- Implemented: Razberry (Z-Wave) usage meter sensor
- Changed: Email setup now includes Port number
- Implemented: Temp+Baro sensor, subType BMP085 I2C
- Fixed: Switch Lights Off (Dimmer) now does not update slider position
- Implemented: Light/Switch type "Door Lock"
- Implemented: Email connection timeout (10 seconds)
- Implemented: Support for multiple Email recipients
- Fixed: RFXtrx USB mode option in hardware settings, will now return to dashboard
- Implemented: P1 Smart meter Power, logging of day/night tariff separately (!note: next day value will be low)
- Implemented: Website security, forbidden result after to many attempts
- Changed: P1 Smart meter Power, now displaying real usage in short log graph, instead of peak values
- Changed: ignoring illegal Raspberry temperature (85/-273)
- Fixed: Scenes with a Push On type switch will now only send the On command to this switch
- Fixed: Possible timer problem duo sunset/sunrise reloading issues
- Implemented: Device type Blinds (Safy / RollerTrol / Hasta / A-OK RF01,AC114 / RAEX / Media Mount)
- Implemented: Raspberry Pi, is ttyAMA0 is free (GPIO/cmdline.txt) it can be used
- Implemented: Volcraft CO-20 Air Quality hardware device (Unix only!)
- Implemented: Date/Time/SunSet/SunRise on every page (except mobile browsers will have only SunSet/SunRise)
- Changed: P1 Smart meter Power, Day/Week graph now displays both meters (day/night)
- Changed: P1 Smart meter Power, graph color swap between tariff 1/2
Version 1.0.484 (April 28th 2013)
- Implemented: Raspberry Pi, updating via the web browser (Settings Tab)
- Implemented: Web Gui, sticky Notification (now only used when there is an update for the Raspberry Pi)
- Fixed: ResetSecurityStatus json return status
- Implemented: Option to display update check
- Implemented: Utility sensors now display their usage value in large font
- Implemented/Fixed: web update now not available for ArchLinux raspberry pi
- Implemented: Version number now read with json call
- Fixed: NMA notifications working again
- Fixed: Visual Studio svn template was not added to SVN
- Implemented: Browser cache is not automatically refresh (with a standby notification)
- Implemented: Notifications for new updates are now send once in every 12 hours, unless checked by hand
- Changed: Temperatures can now be max. 260 degrees
- Implemented: New wind rose icons
- Fixed: Adding Light/Switch as Sub-Device from Devices tab
- Changed: Negative wind direction to positive
- Implemented: Support for the heat pump controller Rego600-Rego637 (Rego6XX)
- Fixed: Dashboard showed all light devices instead of only favorite ones
- Fixed: Sensor Timeout status update in web interface
- Fixed: Rain (PCR800) rate/hour corrected
- Implemented: Add support for Lighting6 (Blyss)
- Implemented: Push On Button switch type (sends an ON command, with option to specify Off delay)
- Changed: Better day value calculation for meter devices
- Implemented: Raspberry Pi onboard temperature sensor
- Fixed: Meter value dupplication checked now performed for actual day
- Updated: Charts Library
- Implemented: Option to delete data point from sensor by Shift-Left click on month/year graph point
- Implemented: Push On Button switch type (sends an OFF command)
- Implemented: Added support for short term data in the custom temperature graph
- Changed: Application Settings
- Fixed: Push On delayed Off was not working
- Fixed: RFXtrx USB mode option in hardware settings
- Implemented: Multi language support for sensors/switch names
Version 1.0.412 (April 1th 2013)
- Fixed: Siren icon on dashboard
- Implemented: New layout, dropdown menu, hardware moved to setting dropdown
- Implemented: Chart tooltip now includes weekday
- Fixed: Option to enlarge the short-log (5 minutes)
- Fixed: Dim slider using now values 1 till ... , 1=Off
- Implemented: New Log mechanism (needed later for log viewer)
- Implemented: command line option '-logfile'
- Implemented: Log Window
- Implemented: Minimized log traffic from server to client
- Implemented: Option to set RFXCOM Mode (enable/disable protocols)
- Implemented: Displaying of RFXCOM Firmware
- Fixed: Deleting a device now also deleted the schedules
- Fixed: Loading schedules only for used devices, deleting otherwise
- Fixed: Stopping of Domoticz with Domoticz share could take 30 seconds, should be 1 not
- Fixed: Domoticz startup script, restart, time between stop en start set at 4 seconds
- Implemented: Mobile desktop, shortcuts for actual tab page
- Implemented: Combined LaCrosse TX3 Temp + Humidity sensor as one new device
- Implemented: Ability to change page / bookmark page using # on url
- Fixed: After/Before Sunset/Sunrise when starting the application (could be triggered next day)
- Implemented: Wind Direction Icons
- Changed: Drag/Dropping sensors now inserts instead of swapping items
- Fixed: KD101 smoke detector battery indication (has none)
- Implemented: Windows, if user has NO admin rights, the Domoticz database will be created in %ProgramData%\Domoticz folder
- Implemented: Windows, no longer need admin rights
- Fixed: Barometer did not show on the dashboard under weather
- Fixed: Only TFA UV sensor will now report a temperature
- Fixed: Light/Switch notification could not be unset
- Implemented: Adjustment value for temperature sensors
- Implemented: multiply value for rain sensors
- Implemented: Scenes
- Implemented: Motion Sensor Off Delay
- Implemented: Sensors that are not received within xx minutes are not logged any more (one hour now, will be in the settings)
- Implemented: Sensors that are not received within xx minutes are highlighted
- Implemented: Wind meter direction is now averaged ( ~10 minutes )
- Implemented: Temperature/Weather sensors now display their main value in large font
- Fixed: Temperature/Humidity display on dashboard
- Implemented: TE932Tool (USB 433Mhz Weather Station, Hideki weather station like IROX Pro X, Mebus TE923 or TFA Nexus)
^^(Unix only at the moment! On Windows it does NOT work)
- Fixed: Weather Station Negative temperature
- Fixed: P1 Smart Meter (Gas) now has a timeout of 3 hours
- Implemented: Weather Station barometer now more precise (xxxx.x hPa), and displaying device forecast
- Fixed: Weather Station Rain meter
- Fixed: Weather Station can now handle 6 temperature channels
- Implemented: Adjustment value for barometer sensors
- Changed: Error log now contains date/time
- Implemented: Log now includes sensor name (if known)
- Implemented: Checking for invalid sensor values
- Implemented: Temperature (large) icons now represents global temperature index
- Fixed: Temperature month/year graph
- Changed: Excluded TE293 for windows systems
- Implemented: Started working on support for the CM180i
- Implemented: Unix update script
- Implemented: Scenes can now be added to the dashboard
- Implemented: SQLite faster journal/update mode on non-windows systems
- Implemented: Added SVN revision number to version string
Version 1.0.9 (February 17th 2013)
- Implemented: OWL113 option to display in Ampere/Usage
- Fixed: Dimmer slider (had a hardcoded device index)
- Fixed: Edit Lights/Switches Smoke Detector type
- Fixed: HTML checkbox 'ischecked' property duo upgrade to new JQuery
- Implemented: P1 Smart meter, Gas value now send when changed, or every 5 minutes
- Implemented: Motion Detector
- Implemented: Smoke Detector Off image
- Implemented: 'Delay Off' for Motion detectors
- Fixed: Not displaying the 'timer' option for certain devices
- Fixed: 'Dimmer' on the dashboard on mobile devices
- Implemented: Serial port auto reconnect option
- Fixed: LightwaveRF dimmer value notation
- Implemented: dimmer timer support
- Fixed: Now able to clear light log for security1 devices
- Implemented: temp_hum Rubicson/IW008T/TX95
- Implemented: Latest RFXCOM SDK
- Changed: Manual Add light switch types are now complete
- Implemented: Dimmer change now directly updates the user interface status
- Fixed: Mobile desktop, blind open icon
- Fixed: Day display for Month/Year utility graph
- Fixed: Mobile dashboard slider image redraw issue
- Fixed: Initial dim slider position on dashboard
- Fixed: Possible issue when disabling/enabling/removing hardware
- Fixed: Notification Enable/Disable checkbox
- Implemented: P1 smart meter will update once a minute, or when usage difference is greater than 40 Watt
- Implemented: OWL 160/180/190 logging/graphs
- Implemented: Option to enlarge the short-log (5 minutes) till 7 days
Version 1.0.8 (February 3th 2013)
- Fixed Hardware Enabled/Disabled option
- Fixed Light/Switches timer, time dropdown combobox
- Implemented OWL113 current logging/chart
- Implemented OWL113 Ampere Notifications
- Implemented P1 Energy Meter/P1 Gas Meter/YouLess, usage notification
- Implemented P1 Gas Meter/YouLess/RFXMeter, today notification
- Implemented P1 Energy Meter, today notification
- Removed SQLite MFC runtime dependency
- Source code cleanup (moved things to seperate folders)
- HTML cleanup (Updated to newer libraries as well)
- Alternative webpage username/password reset (resetpwd file)
- Implemented inverted blinds switch type
- When setting switch level = 0, the switch is turned Off now
- Setting a switch level is now done by setting the level to 0=Off, 1..xx for the level
- New (Windows) command line argument (-nobrowser) do not start web browser
- Implemented switchtype 'Dimmer'
Version 1.0.7 (January 18th 2013)
- replaced all localtime function with localtime_r
- Dashboard: P1 Smart Meter Energy does not show the retour values if not used
- Devices Tab: Check if any device is selected to delete
- Support for MAC serial ports
- Error message when serial port get disconnected
- updated to RFCOM SDK version 6.01
- Dashboard now includes server date
- Barometer graph values now displays as whole number
- Meter values now only inserted in meter table when there is a difference in value
- Implemented utility graph 'last 24 hours usage'
- Added jwsmtp class
- Option to transfer old device logs/settings to a new device (for example when the device battery is replaced and received a new ID)
- Youless Pulse Counter Meter hardware implemented
- Schedule item started message will now also report the timer type
- Clicking Top Left (Domoticz) will show dashboard
- Hardware can now be Enabled/Disabled
- Lights/Switches, Contact status now displays as Open/Closed instead of On/Off
- Lights/Switches, Contact Open/Closed icon
- Temperature Custom Graph
Version 1.0.6 (January 9th 2013)
- RFXCOM Lan will now keep retrying to connect when it does not succeed on the first time
- P1 Smart Meter Serial hardware implemented
- P1 Smart Meter TCP hardware implemented
- Fixed: Temp, Hum, TempHumBaro ID
- Option to add a manual LightwaveRF switch
- Chime light/switch status will now also trigger a notification
- Web Protection, option to ignore (local) networks
- Code should now compile also with VS2010 express
- Code now compiles also with Debian (Mac OS)
- Lighting 1, ARC Doorbell is now send with a 'Chime' instead of All On
- P1 Smart Meter, Gas value now only send/update when the value is changing (once every 1 a 2 hours)
- P1 Smart Meter updates its information to shared clients now once every 60 seconds (reduces network traffic)
- Random Timer implemented (On Time timer with +/- xxx minutes offset)
Version 1.0.5 (December 29th 2012)
- Start of History document