Home Automation Domotica Forum Europe, Bwired Forum

How much for the DS18B20 ?

Hi,

Does this work just putting the ds1820 in the tube, how accurate does this measure the concrete/floor temp ?

Paul

Timo,

Yes I have a Merten KNX yearclock hooked up. Do you want some ets output ?

Yesterday i've noticed that the eib class is interpreting group numbers different then shown on the ets monitor, did you took care of this in the new module ?

Nog als aanvulling: als je bijv klemmenstroken gebruikt hoef je niet gelijk met een domotica systeem te beginnen. Je kunt immers je schakelaars gewoon rechstreeks met je eingegebruikers (wcd, lichtpunten etc) via de klemmenstroken doorverbinden en deze verbindingen later vervangen door actoren, van ...

Mijn advies op bovenstaande vragen is: leg je bedrading per stopkontakt/schakelpunt/lichtpunt naar een centrale kast. Dit kost je uiteraard meer bedrading en werk maar daarmee leg je wel de basis voor je toekomstige domotica systeem. Je bent dan modulair en kunt in feite ieder systeem gebruiken of e...

Timo, Did you make a new class EIB for Domotiga, thought I'd read it somewhere ? What did you change about it ? After using/testing the current class module for some days I believe I found some errors. For some reason the module is not receiving all the datagrams from the bus as it seems so i'm plan...

I'd looked at freebus also a while ago but finally went for Merten/Gira KNX hardware as main line. Dimming is an expensive thing under any bussystem, around 100euro per channel for knx but I reccon freebus is a lot cheaper ? I went for the 0-10 dimming route, so having only 0-10v dimmers (siemens ha...

My setup of eibd: - fresh install of Ubuntu 9.04 - installed pthsem 2.07 by source - installed eibd 0.0.4 by source - recompile everything I only use the usb module I'll try to makeup a step-by step setup because all i could find on the net was based on older versions and i like to have a step-by-st...

In bovenstaand verhaal moet fasedraden op een faseblok natuurlijk zijn 'de nuldraden op een nulblok'. De fasedraden zitten immers op een klemmenstrook gemonteerd en worden geschakeld via de KNX actoren.

Ik wil hier toch even op reageren. Ik zat zelf ook met welk systeem kies je en hoe eea aan te pakken. Daarom heb ik jaren geleden een hele set X10 gekocht maar dat was het gewoon niet voor mij. Veel te trage reacties op schakelacties e.d. Dus dat ging al vrij snel weer de kast in (en is nog steeds t...

Ron, There's an error in the class CEIB. Line 166 through 168 read: sAddressSplit = Split(sAddress, "|" "/") sA1 = Val(sAddressSplit[6]) & Val(sAddressSplit[7]) sA2 = Val(sAddressSplit[8]) But should be: sAddressSplit = Split(sAddress, "|" "/") sA1 = Val(s...

Great work Ron !!

I'd like to test it on the EIB interface when possible.

For the error: As far as i can see it is just some missing or misplaced code, i did rearrange the logging and now it was solved. I also did some cleanup on the interface setting part, after the btnSave_click() in each interface setup i added the FMain.UpdateStatusPanel(). In the FMain.UpdateStatusPa...

Well I did make a quick and dirty stripped version of domotiga last night, removed all the F's and references. I did stumble into some strange ' error coded stuff' like sending something to the logfile before creating the logfile.... ;-). For now i'll wait for Ron because he's the maintainer for Dom...

Hello, I'm thinking of creating a backend/frontend version of domotiga. The backend will run (silently) as a daemon and fire all scheduled events read from the database and act on actions whereas the frontend will just modify the database. What would it take to create the backend ? I'm thinking of s...