Home Automation Domotica Forum Europe, Bwired Forum

vThingCO2.ino??

I think you only need to load H801_LED.ino. Discard the rest.

So just download only H801_LED.ino to a new folder (H801_LED) and load it from there.

Cheers,

Timo

I made one using an ESP8266 (ESP-01) and a JeeNode Lux Plug.

Does MQTT over WiFi and has an HTML status page with WebSocket connection.

Info is on my site http://www.sariwating.net/2016/04/06/mqtt-light-sensor/
Including a link to the code on my GitHub

Cheers,

Timo

Looking at the IC it's HBS.
datasheet.eeworld.com.cn/pdf/MITSUMI/15 ... MM1192.pdf
Home Bus System.. a japanese standard.

Not much that I can find on it really. Protocol information etc etc...

What's it used for? Air Conditioning or something?

Cheers,

Timo

Have good experience with a dutch company called Robin.
http://robin.nl/nl/products/

Cheers,

Timo

Eventually solved these issue's. :D With regard to the eibd, i needed to configure the install with option --enable-eibnetiptunnel. Once this was done, eibd started. Also the connection to eibd from Domotiga works now. I'm connecting to IP 127.0.0.1 and port 6720. The next problem is to create a wo...

Ron,

Can you forward the data to me? I'll have a look at it.

Timo

1x Oregon THGR228n en de regenmeter wil ik wel overnemen.

zend je een pm.

@djdive

Ik gebruik DomotiGa en heb een testje geschreven. Ziet er goed uit, maar heb geen idee of het ook echt klopt
In ieder geval wel leuk om nu die sensoren op de leidingen echt nuttig te gebruiken.

De berekening die ik wil maken is Q=m*c*Delta T Waarbij de m en de c 2 vaste waarde zijn die ik weet Ben hier ook heel geinteresseerd in. Ik neem aan dat je voor c 4186J/kg.K gebruikt? (soortelijke warmte van water). Maar hoe kom je aan m? Gebruik je daarvoor circulatiecapaciteit van de pomp? (omge...

Ah, ok.

I thought it was me. I had just added two more sensors and pachube stopped working. But it was a coincidence.
Have you tried rddtool on a NSLU2 Ron? I couldn't install it with apt-get.

Yeah I know that site. I also like this Uitzending Gemist Script. On 04/04/2010 I ordered a 3 pack Powerhouse X10 DS10A's for next to nothing . They arrived today and I will convert them from 310MHz to 422,92MHz using TX1 Transmitters I ordered last week. This Website describes how to do the convers...

Which hardware do I need? Is the following list complete/correct? 1) an old laptop for running Domotiga? 2) an rfx receiver for receiving sensor values? 3) an rfx transmitter to control the valves and KlikAanmodules? 1 - An old laptop will do, or an ION based platform. I run the DomotigaServer part...

Had an idea for the 15 inch touchscreen in the kitchen. I bought an old Apple Imac G4 screen en gutted it. Mounted it on the wall and now it's waiting for internals. (LCD panel and touchscreen kit) Space is tight so I will have to find a 15inch LCD panel that uses an external power supply. http://im...

Hmm, Reading the info on this link can't really give me a conclusive answer. It doesn't mention a FHT 8-II specifically. Others are close but you can't be sure. You have to make sure the devices are supported. And you have to be able to write a class file for DomotiGa or borrow you hardware to someo...

Rene, Your link to conrad doesn't work. Can you update it please? If it's the FS20 products you are referring to then I'll have to disappoint you. At the moment there isn't any DomotiGa support for FS20. It works om 833MHz and as far as I know there is no rfxcom transmitter on that frequency. Howeve...