Home Automation Domotica Forum Europe, Bwired Forum

We solved it then. It never occurred to me that the otmonitor.conf is written by otmonitor, so yes the password in my config file was unencrypted. When i 'save' the otmonitor.conf by otmonitor i get an encrypted password which works as expected when i turn on the authentication on mosquitto.. Thanks...

Lots more logs, just trying to supply a lot of info. First, all the logs of when it goes wrong.. WITH authentication. As you can see, the otmonitor user exists and it works with mosquitto_sub. pi@zonnestroom:~ $ mosquitto_sub -d -t '$SYS/broker/load/bytes/sent/1min' -v -h 192.168.153.1 -u otmonitor ...

mosquitto.conf pid_file /var/run/mosquitto.pid persistence true persistence_location /var/lib/mosquitto/ log_dest file /var/log/mosquitto/mosquitto.log password_file /etc/mosquitto/passwd allow_anonymous false log_type all There is not much info in it. The 192.168.153.7 is a PI which runs the otmoni...

Hello, I'm trying to connect my OTmonitor to a MQTT bus (mosquitto). When i configure mosquitto to use NO AUTHENTICATION it works like a charm, however when i wish to use authentication to message are not sent to mosquitto. My username/password combination is correct, since when i use mosquitto_pub/...

I'll hook the OTGW up again today to test with a different voltage setting.

Before i do that can you explain why i need a different voltage setting? It's been running fine for weeks on setting 3 (default), why would it suddenly need a different voltage setting?

Hello, I have a simple setup. iSense v28, OTGW 4.2.5, Remeha Avanta. The OTGW is hooked up to a rPI through USB. The rPI runs the otmonitor software and has been running fine for weeks, until about 3 days ago. When i 'view' the messages tab, all i see are Error 03. When i switch the OTGW to monitor ...

I've been trying to get the otmonitor to run on a RaspberryPI with Raspian Jessie. I'm using the following command to run it: ./otmonitor-ahf -w 8080 --daemon /dev/ttyUSB0 It starts and i can see the webpages, however they do not get updated with any values. I know my OTGW is on ttyUSB0, since i can...