Home Automation Domotica Forum Europe, Bwired Forum

Ok same behaviour using MQTT. Seems logical since the data is coming from the opentherm protocol.

Ok great. Works fine here too with this setup eTwist <-> GTW16 <-> OTGW <-> Elga Ace. I do notice that with a regular frequency the eTwist reported temperature drops to 1c and increases in a few steps back to the correct measured value (pink line). https://i.ibb.co/4F22TMR/Screenshot-2021-11-28-at-2...

What are you experiences so far? Is this combination working out for you?

I can see my Toon connects with the URLs. For now I have blocked that complete domain. Its not much data, only couple of kb.. https://cdn.pbrd.co/images/Hnahv79.png Edit: remarkable choice of domain btw... Bjorns-iMac:~ bwbboot$ whois quby.count.ly % IANA WHOIS server % for more information on IANA,...

Marcelr, TheHogNL and others.. smart move from Eneco to invite you guys. Hopefully you did not sign any NDA or other agreement that limits you from posting and sharing details about Toon2... Can you confirm?

Hey guys, I have Domoticz included as secondary controller in Toon since I want to read the power data from my smart plugs directly. Its working now but due to trial and error I have two dead nodes in my zwave config. There is no option in the interface to remove nodes. I can't do an exclude since t...

@TheHogNL

Seems you have had some time to play with the new hardware. Can you share photo's of internals, etc here?

Cheers!

Hi All, There will be a new Toon soon. Source: forum.toon.nl/nieuws-en-mededelingen-28 ... -toon-2023 Toon.nl will schedule an experts session #vraagonsoverToon May 23rd between 19.00 and 20.30 New hardware will have: - 512Mb Ram (used to be 128Mb) - 1Gb flash memory (used to be 128Mb) - 1024 x 600 ...

This is one of the last tests that i did. A strace on for example HCBv2 happ_pwrusage reveils the following messages being sent: read(3, "<action class=\"response\" uuid=\"eneco-002-XXXXXX:hcb_config_61127789807\" destuuid=\"eneco-002-XXXXXX:happ_pwrusage\" service...

no luck so far, any constructed XML posts to /bxtproxy are accepted but totally ignored by the hcb_bxtproxy which seems responsible for processing incoming requests.

@Ierlandfan, i don't have solar generation data so the rrd graphs will never have to process any updates there.

Well, i figured since TOON can be updated from the mothership (like activate subscription) i want to run tcpdump on the TAP0 interface for a while to see whats coming in and out. Interestingly my first findings confirm that communication is done by using the /bxtproxy. I even wrote a quick/dirty scr...

Many thanks, works without any issues so far!

Do you have strace available as an ipk? Possibly tcpdump as wel?

I did some googling and its going to be too much hassle to get it to work using s0 pulses (in my case, since my inverter does not have a s0 pulse output). Looks like i need to keep investigating options to update values directly into toon.

Yes interested. This works by using the existing P1 meter? My inverter does not support s0 pulses but can try to convert the data to s0 pulses using my RPI.