Home Automation Domotica Forum Europe, Bwired Forum

martenjacobs wrote:

JacDomotica wrote: Some one can give me a hint?

Looks like a wiring issue. Have you re-checked everything?

one wire wrong thank you!!!

Hello, I tried it again and got the following error: sudo python . --jtag-available --output-level DEBUG INFO:__main__:Starting up... INFO:__main__:Detected JTAG hardware 'rpi1' INFO:__main__:Written private and public key pair to ./id_rsa and ./id_rsa.pub, respectively INFO:rooter:Waiting for Toon ...

hello, i tried it today and the installation was oke. I think. But when starting the proces it is waytin for the toon to start. INFO:__main__:Starting up... INFO:__main__:Detected JTAG hardware 'rpi1' INFO:__main__:Written private and public key pair to ./id_rsa and ./id_rsa.pub, respectively INFO:r...

... Info : J-Link ARM V8 compiled Nov 28 2014 13:44:46 Info : Hardware version: 8.00 Info : VTarget = 3.319 V Info : clock speed 1000 kHz Info : JTAG tap: imx27.etb tap/device found: 0x1b900f0f (mfg: 0x787 (<unknown>), part: 0xb900, ver: 0x1) Info : JTAG tap: imx27.cpu tap/device found: 0x07926121 ...

I can stop the processor now but loading the boot image is not working. I get the next error: C:\Projecten\OpenOCD-20170821\bin>openocd -f interface/jlink.cfg -f ed20.cfg Open On-Chip Debugger 0.10.0 (2017-08-21) [https://github.com/sysprogs/openocd] Licensed under GNU GPL v2 For bug reports, read h...

Hello, I bougth an toon and an jtag interface and i am trying to connect the interface via openocd to my toon. But i get this error: PS C:\Projecten\OpenOCD-20170821\bin> ./openocd -f ./interface/jlink.cfg -f ./ed20.cfg Open On-Chip Debugger 0.10.0 (2017-08-21) [https://github.com/sysprogs/openocd]...

Hello, I bougth an toon and an jtag interface and i am trying to connect the interface via openocd to my toon. But i get this error: PS C:\Projecten\OpenOCD-20170821\bin> ./openocd -f ./interface/jlink.cfg -f ./ed20.cfg Open On-Chip Debugger 0.10.0 (2017-08-21) [https://github.com/sysprogs/openocd] ...