Home Automation Domotica Forum Europe, Bwired Forum

Never mind, i just saw on the Enerlogic website that it also shows my actual usage to be zero.
So, the issue is in the slimme meter itself. Could turn out to be a cheap month....

Bart

HI I have a Rooted Toon2. I just noticed that from 1st of January the gas usage is no longer picked up, shows zero for each day/ hour. Power is being picked ok, both day and night power. Connection with the P1 meter shows green. Also my domoticz system collects zero's I run version 4.19.10, i have a...

It is only so weird that Quby doesn't seem to think it is necessary to control the heater when a STRV is requesting heat. This is probably because Eneco intends to use this set-up in combination with District Heating (Stadsverwarming), like in Rotterdam. So for systems without a boiler and immediat...

Hi, great app! In the Toon2, which i installed today I saw several items i would like to pull into Domoticz. (maybe also available in Toon1?) Could these be added to the boiler app? - Humidity (not a boiler property...) - Boiler Max Temperature set point and degrees/hour increase allowed (Setting Ve...

Based on several posts, I combined getting all Toon data to Domoticz in a single DzVents script. So both boiler data, thermostat data and the P1 data. Now that I have a rooted Toon2 :D I had to update the script, as the P1 data apparently changed in the http://<ToonIP>/hdrv_zwave?action=getDevices.j...

Hi. In the workflow for Domoticz to Homekit via Homebridge one of the options is using a room and the items in that room will appear in Homekit (which you can then distribute over the different rooms in the Home app). Add items to the room and it is added to your phone, tres simple.... I think this ...

Toonz wrote: Version 3.7 available on ToonStore.
Changelog version 3.7:
- avalex.nl implemented (waste provider 24, enter ical calendar id in settings screen)

Werking fine! Thanks



Sent from my iPhone using Tapatalk

hi, need some expert help.... This line mentioned in an early post of this thread does not work for me http://192.168.1.9:10080/hcb_rrd/ReadRRD.html is this link connected to an older version of Toon? when i type to http://192.168.1.9, the browsers goes to http://192.168.1.9/qmf/www/ Is this normal?...

Now the Boiler Status app is working, the reported boiler water pressure remained 0, same as mentioned for other users. I found this reference from the OTGW, it has a list of boilers and what OpenTherm communication is being reported. http://otgw.tclcode.com/matrix.cgi MsgID 18 reports the water pre...

I had a problem with the Boiler Status app reporting only zero's; using a solution given by Emacee in this forum, I found out that the thermostat was not set to Opentherm, but was on ON/OFF. This setting is not designed very clear.... :o Would it be possible to put something in the script to check t...

Toon Software version 4.11.6

Is OK?


Sent from my iPhone using Tapatalk

My provider, Avalex, generates this link to which you can add to your calender. Would this work straight in your Toon App: https://www.avalex.nl/ical/0503200000104881 If you then show the first two events or more fancy all events for the coming 7 days, that would be a great solution for a Afvalwijze...

Hi, can you check two things: 1. Is your hosts file correct ? (https://www.domoticaforum.eu/viewtopic. ... sts#p83698) i added to /ETC/host (so was missing) 172.20.48.1 feed.hae.int feed After Toonstore was working properly btw a # was added in front my line and the same line was added again the bo...

Very interesting thread/project as I would like to implement a zone control as well. What is your intended end game? - most smart TRV's (like the LC-13) do not feed back the actual temperature. Do you intend to stop at controlling set-points from Toon? Or include (if available) alternative temperatu...

marcelr wrote:Could you post the toonstore log from /mnt/data/update/_opkg_<whatever>.log?

Folder has 1 file only: _opkg.qb2-uni-9.9.99.script.sh
So no log file...

greetz
Bart