Home Automation Domotica Forum Europe, Bwired Forum

Yes,
I reboot, could connect to Toon with putty
and did
./upgrade_rooted.sh -v 5.0.4

Now the upgrade was succesfull!

#-A HCB-INPUT -p tcp -m tcp --dport 22 --tcp-flags SYN,RST,ACK SYN -j ACCEPT Yes port 22 is still in so I will reboot Uhmm, the line is commented out (#). Probably lost access now..... not yet, I didn't reboot, I was doubting :-) I have to uncomment This is my tables now ###########################...

Yes port 22 is still in so I will reboot

I also updated,

after updating I got an error

Upgrade failed. Please check the logs at /mnt/data/update/upgrade-qb2.sh.log
Quitting the upgrade. It was a nice try tho...

I Included the log file

I didn't reboot yet

is it posible to add a weerstation.
I'm living in Amsterdam and the schiphol is my weerstation.
So my Toon isn't correct in when it raining

Downgrading is possible but very hard to do. I haven't done it yet. I'm running the same version as you also so I don't think that versions is wrong (Eneco already pushes them to the early adaptors). Try to remove some addons/apps from the Globals.qml. Check with 'free' how much memory you have fre...

Many thanks for TheHogNL for helping me. Yesterday evening after the TheHogNL had tried to fix my Zwave module and a reboot Toon installed and update by it self Toon started to reboot by it self every 5 to 10 min This morning I found out that the zwave antenne a was connected to the wrong connector,...

I found the solution to my issue. After rooting my Toon, I connected to Zwave antenne on the wrong connector :oops: this is the wrong connector https://tweakers.net/ext/f/HjSeIluVxNNBYUxGGJ5VmAVr/full.jpg Beside the Zware chip is the connector for the Zwave antenne https://tweakers.net/ext/f/GuWUHIq...

I remove alle devics

this is the output

{"dev_settings_device": {"uuid": "eneco-001-141971:hdrv_zwave_67723C6C675", "name": "settings_device", "internalAddress": "settings_device", "type": "settings_device"}}

I did, and then it is connected,
but when I go back to the home screen, the connect is lost again ,

Hi,

I'm trying the connect the meteradaptor to my Toon.
No connecting, even not at 10 cm.
Is there a way to reset meteradaptor ?

@jossie67: Just remove the file /usr/lib/opkg/lock and try again. remove and now I got the error Unable to determine your current running version! [/quote] Please check again your base-qb2-ene file. It is missing and therefore your toon is not working properly. Not sure why it is missing. Did you h...

@jossie67: Just remove the file /usr/lib/opkg/lock and try again. remove and now I got the error Unable to determine your current running version! DEBUG information: Detected: Available: 1.9.10 2.1.0 2.2.24 2.3.17 2.3.29 2.3.36 2.4.12 2.5.11 2.5.14 2.5.18 2.6.24 2.6.33 2.8.16 2.8.21 2.9.15 2.9.26 3...

I also tried to upgrade my toon. Now my Toon is stucked in the boot screen waiting for the last dot to be filled I changed the /etc/inittab # qtqt:245:respawn:/usr/bin/startqt >/dev/null 2>&1 qtqt:245:respawn:/usr/bin/startqt >/var/log/qt 2>&1 The file [hcom]Received HBXT_DISCOVERY_ALIVE fro...

I'm sorry but I can't find the button,
This is the home screen

[img=915,507,,,"toon1"]https://tweakers.net/ext/f/ZABEIfSFAm4h ... M/full.jpg[/img]

En this is mijn instelling

[img=916,501,,,"toon2"]https://tweakers.net/ext/f/daBHFIRmRe8P ... l/full.jpg[/img]