Home Automation Domotica Forum Europe, Bwired Forum

TheHogNL wrote:Send me a DM with your mobile phone number and I'll whatsapp you tonight to assist over a teamviewer session. I'm curious what's going on.

Send you a message

I think you have a very old version of Toon firmware which doesn't update the /etc/hosts file properly (your feed.hae.int entry in your hosts file doesn't match with the routing table) Try to remove the "feed.hae.int" line from the /etc/hosts file and restart the Toon and the script again...

marcelr wrote:Maybe you should edit inittab to not start openvpn, then kill it, and let the script do it for you.

I can start the VPN manually, but it still does not update.
It also shows up @ the top command as a process.

marcelr wrote:try
Code: Select all
ping 8.8.8.8
(google) then.
If that doesn't give a response, you don't have a working connection to the outside world.

I tried google. I get a nice ping back.

marcelr wrote:In that case, you should be able to ping feed.hae.int, and get a response.

When I try to manually start the VPN, I get the following:

Code: Select all

Socket bind failed on local address. [AF_ INET]127.0.0.1:8000 Address already in use.

marcelr wrote:In that case, you should be able to ping feed.hae.int, and get a response.

I’m not getting a response from that URL.

I tried a few times now. Nothing changes. The inittab is not empty. The openvpn item is there. Uncommented. Hey. With the forcing it is still waiting for VPN to be alive. See the screenshot. Thank you :) Just keep trying a few times. had that once before too. Also, check the /etc/inittab if it's not...

As far as I can see it is running. I see the line and the conf file defined there. So it is booting. You can test whether vpn is started by typing ps | grep vpn If that gives no output (or nothing useful) you can start vpn manually by copying the command part of the openvpn line from /etc/inittab in...

Hey. With the forcing it is still waiting for VPN to be alive. See the screenshot.

Thank you

Hey.

I tried doing a software update, and the power fell out during the update.
I can access SSH, and the screen is stuck at the T logo.

I tried using the update script, but it cannot seem to connect to the vpn. The keys are in the vpn folder.

What can i do?

Thanks

Hi all, I appearently broke the small ribbon cable while pushing it in too hard. I fixed it by scraping a little of the plastic off a bit before the end of the cable, fold it and push it in. Now it works again. I do have some other problems with my rooted toon. Should I ask them here, or post anothe...

That was my first guess. Appearently I have tried it so hard that I damaged the flexcable.

I cut a little off, and scrape a little of the plastic film off, put it in and it works like a charm. Thank you.

I do have some other problems. Should I make another topic about those?

Thank you

Hello all,

I rooted my Toon, but after rooting my touch screen does not function anymore. I can access the uboot menu etc, and the toon does boot.

I double checked the cable and as far as I can see there is no damage on it. Is there anything I can try?

Thank you

Home Automation Domotica Forum Europe, Bwired Forum

Search found 13 matches

Re: Toon not booting after failed update

Re: Toon not booting after failed update

Re: Toon not booting after failed update

Re: Toon not booting after failed update

Re: Toon not booting after failed update

Re: Toon not booting after failed update

Re: Toon not booting after failed update

Re: Toon not booting after failed update

Re: Toon not booting after failed update

Toon not booting after failed update

Re: Touch screen does not work after rooting

Re: Touch screen does not work after rooting

Touch screen does not work after rooting