Home Automation Domotica Forum Europe, Bwired Forum

Lucien wrote:The reset did the trick !! Thanks again for all your help !!
Now fresh data, fresh setup and a sunny day ahead of us. Hopefully, everything works fine tomorrow.

Everything works very well now !!

The reset did the trick !! Thanks again for all your help !!
Now fresh data, fresh setup and a sunny day ahead of us. Hopefully, everything works fine tomorrow.

Factory reset is safe. You could also remove the rrd files etc manually but just factory reset will be easiest. You will probably see an activation screen but the root scripts will kick in a few seconds later to activate your toon on the fly Unfortunately, somehow my meteradapter died during trying...

Thanks Marcelr and TheHogNL, I just implemented the short circuit methode, and it looks fine. Tomorrow the big test. Is it safe to do a factory reset to start with fresh data, or is there another way to clear my data and start collecting data from scratch?

Thanks guys, this will do the trick. I was new at the forum last week and was a bit lost in the overload of information. First rooting, then Toon Mobile, Zon op Toon..... I did see the schematic but lost it somehow. Next test tomorrow. Unfortunately, still the problem on the total production remain...

Thanks guys, this will do the trick. I was new at the forum last week and was a bit lost in the overload of information. First rooting, then Toon Mobile, Zon op Toon..... I did see the schematic but lost it somehow. Next test tomorrow. Unfortunately, still the problem on the total production remains...

Ok so maybe the total value is currently wrong due to the previous faulty pulse state? How is the realtime view of power usage vs solar production on the toon? Does the solar production realtime (in Watt) match the solar production you get from the inverters together? And is the realtime power usag...

So, minus 5 is never good. Should be positive. This calculating is just a simple (production meter kWh - net delivered kWh) calculation. Somehow your net delivered it HIGHER than the produced kWh and that isn't possible Taking for granted that 11kWh production is good, then the 16kWh delivered to N...

Can you please tell us how you wired your kWh meter and which kWh meter you have? I do use an EMAT Dinrail kWh meter 45A 1-fase Digitaal MID GEKEURD this one give 1000 pulses per kWh. Connected by the optical sensor of toon. Picture1.png Picture2.png Picture3.jpg picture4.jpg picture5.jpg Picture6....

Thanks to this forum I have my ZonOpToon working fine using a kWh meter. My production is measured just fine but on one screen the figures are wrong. Todays case: PV production: 10.5 kWh , my production feeded into the grid :4.36 (from DSMR-Reader) On Toon I get in the screen Zonnepanelen: In totaa...

Thanks to this forum I have my ZonOpToon working fine using a kWh meter. My production is measured just fine but on one screen the figures are wrong. Todays case: PV production: 10.5 kWh , my production feeded into the grid :4.36 (from DSMR-Reader) On Toon I get in the screen Zonnepanelen: In totaal...

TheHogNL wrote:If you still miss toonstore please run:

Code: Select all

opkg remove toonstore
rm -rf /qmf/qml/apps/toonstore*
sh /root/update-rooted.sh -f
killall -9 qt-gui

Super thank you TheHogNL, this did 'the trick'

I'm new here, so sorry for stupid questions or actions.... I bought and rooted my Toon using an RPi with martenjacobs/ToonRooter and ToonSoftwareCollective/update-rooted. Thanks for all the work to help us out. Unfortunately I selected the latest firmware 5.25.8. The Toon is functioning fine and SS...

I'm new here, so sorry for stupid questions or actions.... I bought and rooted my Toon using an RPi with martenjacobs/ToonRooter and ToonSoftwareCollective/update-rooted. Thanks for all the work to help us out. Unfortunately I selected the latest firmware 5.25.8. The Toon is functioning fine and SSH...