Home Automation Domotica Forum Europe, Bwired Forum

Because of the various bugs (features) in the Evohome's control logic (Opentherm failures, heat requests when there should be no demand, Comm loss due to busy 868MHz freq.), I'm planning to stop using the EvoTouch controller and control the HR80/HR92 valve controllers directly from Domoticz. Reverti...

If you have the I/O expansion option installed, there is a simple programmable low-current PGM (I believe @12v) output, which you can use to trigger the kaku transmission with some simple schematic or microcontroller.

Thanks! I've recompiled Domoticz with the Evohome's debugging options enabled. This is the result for a zone setting: 2016-02-09 10:41:10 --- W --- 18:056026 01:040126 --:------ 2349 007 00025802FFFFFF (X▒▒▒) setting zone 1 to 6 degrees using Domoticz' interface 2016-02-09 10:47:32 --- I --- 01:0401...

Dear fellow Evohome users, I've set up a Nano + CC1100 combo (which should be identical to the RFBee unit, apart from a 16MHz clock), with a plain copy of fullTalgoRythm's firmware except for the OSCCAL override. Domoticz picks up the Evohome's RF-signals, correctly interprets temperatures and adds ...

Na de aanschaf van een tweedeands Evohome-set mis ik helaas de adapterset van de HR80 thermostaatkranen, waardoor ik de thermostaatkranen nog niet kan gebruiken. Het gaat mij (vooral) om de Danfoss RAVL adapters die bij de HR30, HR40, HR80 en eQ-3 modules bijgeleverd worden, waar ik er vijf van nodi...

I've a question regarding the interfacing between a Powermax Complete and a Raspberry Pi. I wrote a python script which successfully enrolls to the UART interface of the Powermax and it allows me to read out the relevant status information. So far so good. However, I would like to set-up a json-serv...

Is there anyone who can help getting me a RFXCOM Ethernet base module with (at least) Visonic 868MHz receiver card and a 433MHz Kaku transmitter? For a nice price of course

Regards,
Martin