Home Automation Domotica Forum Europe, Bwired Forum

Info: After a nodeMCU fail, I able to flash the firmware with serial interface with USB UART programmer without any problem. It is about 3$ so not a PIC programmer price

Same problem. One OTGW is update without any problem, the second one is not... I wait a UART-USB programmer, i hope i able to flash it with the serial intrerface...

i hope it not bricked...:) I started the update the remote site (with nodeMCU), but the network connection is broken, so i need to force close the OT monitor. After that, if i try to flash the firmware, every time it said "please reset the device manually..." message. (seems to not put to ...

try this, but the connection is broken in update process... now the OTGW is not working. I hope it possible to re-flash the firmware via COM port...

Yes, it is 4.2 version. I try to update it, it is a remote place, not so easy to access it...

Yes i use the "SH=" command to set the max CH setpoint.

i See. Now my problem is that i would like to use a on/off thermostat with weather following mode. My idea is: The termostat send a simple ON/OFF signal. it set the setpint from min (10) and max (90) water temperature, and set a on/off state of the central heating. I periodically send a max CH setpo...

Great, thanks a lot!!

Hello there, We connect a on/off dry contact relay thermostat to the gateway. It possible to somehow read the relay state? Any message ID that show the relay open or close state? I read this, but not so clear, how to read this value: As indicated, the gateway by default will instruct the boiler not ...

Hello there,

I would like to use the OTGW with monitor mode. I able to set it with otmonitor, but every restart it chnange back to Gateway mode. How to save the actual mode?