Home Automation Domotica Forum Europe, Bwired Forum

Thanks again Schelte. Yes, sorry, the OTGW was not exactly dead, but had experienced more than 1000 errors and stopped working. I could not start the upgrade process again. I do have the USB only, but I am not entirely sure about the Domoticz connection. I will make 100% sure from now on that I only...

Many thanks Schelte for the quick and professional response. I have to say, it did not quite work as you describe: after starting the upgrade as per your step 1 & 2 I did NOT get the instruction to manually reset the OTGW. On the contrary, the process started immediately, but quite slowly, and a...

Just tried to upgrade the firmware as per the instruction of the (marvellous) manual. This failed halfway. I noticed a large number of retries and errors. Trying to upgrade a second time failed also, at around same point, ie 45-46%. Then I rebooted the OTGW, but it was dead. :cry: I assume that I wi...

Good News. I followed your advise: got OTMonitor downloaded, installed and working. Switched off the OTGW from Domoticz. Rebooted the OTGW and voila, it all seems to be working. Logging all messages. No Errors! So, here is a happy chappy. Many thanks for your pointers. Will be away for a few days be...

Many thanks Schelte for your help. I am going to focus first on getting OTMonitor up and running and then will take it from there. I found the paragraph about the diagnostic firmware and look forward to running this through my system. Will keep you posted, but it is all going very slowly as I am ver...

I have just installed the OTGW hardware and approaching it from Domoticz/RPI. Please see attached log. I have (for now) three questions: 1. After Reset I do get a number of B/T messages in the log, however, after some 10-15 minutes this stops and I get several different error messages. 2. What does ...