Home Automation Domotica Forum Europe, Bwired Forum

Hi,
I just send the command

Here is the log:
https://transfert.free.fr/yUozrQ0

I send the RR=1 here:
18:45:53.044121 RR: 1

I just received my second gateway, for the second circuit!

I know this is very difficult to help by message,
Do you think i could give you an access to see by yourself ?

Hello,
the command didn't work :/

hvxl wrote: ↑Mon Nov 18, 2024 12:00 am This is a BLOR (Boiler Lock-Out Reset) request. You can instruct the OTGW to send such a request using the RR=1 command.

thanks for your reply.
which commands do i need to send ? not sure what to do exactly .. and mess the thing up more

thanks for your reply, I will try on my next issue.

Hello, Here is a new test: my temperature order was 20 but my room was 18. at 8:19 I tried : CH=1 then MH=2 then RR=0 then RR=1 nothing happens at each step, the CH stay off. so at 8:30 I changed the thermostat temperature (was at 18) and then it works as always. The only thing I notice (to explain ...

Hello, time to time my heatpump has trouble and stops. I can clear the error from the thermostat and I this command appear in the log: 12:18:30.029238 T90040100 Write-Data Remote command (MsgID=4): 1 0 12:18:30.123018 B500401FF Write-Ack Remote command (MsgID=4): 1 255 How to send it from OtMonitor ...

New day, new questions :/ I was doing some tests (testing commands previously for driving circuit 2 from my gateway on circuit 1) The Heating was completely off, and by changing BS=19 nothing append. (the room temperature was below 18.5) So I changed back the Temperature on my thermostat from 17 to ...

Ok Thanks !
I understand.

I have 2 circuits
One thermostat on each.
Do I need a Otgw on each circuit ?

That's weird because on info screen I see some second circuit informations (but not room2 temperature ans setpoint)
and I remember saw such informations on the graph of otgMonitor ..

Regards.

So I turned on my Heatpump. I did some test: My physical thermostat is set to 20°c I see cycling messages : 22:17:32.942065 T90101401 Write-Data Room setpoint (MsgID=16): 20.00 22:17:33.042972 B50101401 Write-Ack Room setpoint (MsgID=16): 20.00 22:17:47.934909 T90101401 Write-Data Room setpoint (Msg...

Hello,

I will turn on my heater soon, and I will try to figure out how to controll it this time

Do I need to update to last firmware version 6.6 first ?

Hi,

Today, the Room setpoint is still at 19, but the room temperature is still at 20 :/

Here is the today's log

https://transfert.free.fr/aGg8aCR

the boiler started several times :/

Sorry I mea, you said my gateway was in standalone mode but it isn't ( it's in gateway mode) The normal command from thermostat must be vi TC command but this does nothing on my boiler here I Changed the OpenTherm Gateway Monitor thermostat value: 22:44:04.425726 T00000300 Read-Data Status (MsgID=0)...

Here is my log file since yesterday after the heat-pump restart: https://transfert.free.fr/4fXwrOH My OTG is in standalone mode, but my heating is working correctly (as before) (so with the thermostat's temperature) What I need to do ? Write a custom OTG Firmware based on my device strange behavior ?

Thank you for your reply (and also for your work for Opentherm Gateway) I think the brand hasn't respected the opentherm protocol, the thermostat was provided by atlantic and they are not comunicate on another thermostat compatibility. Last year I contacted them to know how to make my heatpump conne...