Home Automation Domotica Forum Europe, Bwired Forum

Thanks for the links. I was thinking about starting to develop Open source Domotica software in Java. I have written some Java software just for my home situation, but I wanted to write more generic software. So, I will have a look at your project. I also found this open source project in Java: http...

I'm not sure if I fully understand how this works. Does this PCB replace the thermostat (which I expect so send Opentherm commands to control the feeding water temperature), or do I still need an (Opentherm) thermostat? And if I do not have an iPhone, can I control this PCB by sending commands over ...

What probably helps is covering up the sensor with something like a dark cloth, so that the sunlight cannot influence the sensor. After that you probably need to turn the pot-meter (as described in de manual) to a position where every turn/pulse you see the rfx-com led blinking. At first I had no bl...

I have posted some sample code on making a socket connection to a RFX com receiver here:
domoticaforum.eu/viewtopic.php?f=7& ... 652#p47652

I created a very lightweight/simple program. I haven't put a lot of effort (yet) into logging, error handling and/or making it generic. The main goal was to get up and running quickly and make the program better when/if I have time. It's a single threaded program that keeps on running in a dedicated...

I have written software in Java that makes a socket-connection to a RFX-com reciever and filters out events from devices I have in my house. The events I want to keep, are stored in an Oracle database (using JDBC). I can share this software, but it was created quickly for my own devices, not a gener...

I will attend this workshop also.

I already have a license for homeseer, but I don't use it yet.
Until now I have written all the software myself, but I want to see if using homeseer will give me some extra options.

Ook alleen vandaag: een Roomba 555 Voor € 369,95 incl verzendkosten op:
http://www.superdagdeal.nl/

Bedankt voor de tip. Ik heb er ook maar een besteld.
Ik bouw mijn eigen rfx-com decoder software voor de apparaten die ik in huis heb (zodat ik ze in een Oracle database kan opslaan).
Ik zal eens kijken of ik dat vet percentage nog kan decoderen, maar zo te lezen zal dat nog niet meevallen.

If you use a different URL, you can get a bigger image from buienrader. For example: http://www2.buienradar.nl/display.php?width=960&height=960&country=nl&maptype=2&opacity=75 Note: unless you tell it otherwise, Safari iPhone (and iPad) assumes your page is 980px wide. You can also c...

Ik had ook binnen 5 seconden 2 mails: 1 met license codes en 1 met order confirmation (zaterdag-ochtend besteld).

This year Honeywell has introduced a system (Honeywell evohome) in which you can control the temperature in every room individually and also send a signal to the heating boiler from every room. (When you open up a radiator-thermostat but the heating boiler is off, the room does not heat up). For exa...

I replaced my old fan (with Perilex plug) with an Orcon MVS 10GP fan (also Perilex plug). I made my own remote control for this which can be controlled with devices like Klik-Aan-Klik-Uit or X10. Normally the fan runs in low vertilation mode (1; 4W) and a few hours a day I switch on the ventilation ...

Other bulletin-boards at Nitroserve seem to have the same problem: cbforum.nl/viewtopic.php?f=32&t=316 ... ;start=225
(on cluster.nitroserve.nl)

Today the forum was a few times not available (so slow that I got a timeout). I tried to access this page: http://www.domoticaforum.eu/search.php?search_id=newposts When I tried again a few minutes later I saw the message below (both in Internet Explorer and in Chrome). 5 minutes later the forum was...