Home Automation Domotica Forum Europe, Bwired Forum

Net klaar met inbouwen :-) Ik gebruik 1 module als 2x hotel schakeling, werkt naar verwachting. Het toevoegen in Homeseer ging niet volgens verwachting, heb het een paar keer opnieuw moeten proberen. Uiteindelijk is de module toegevoegd in Homeseer. Ik zie een beetje dezelfde problemen als stefxx (s...

Ben overtuigd Net 2 besteld. Ga ik ook maar eens het z-wave avontuur aan.

Laat mijn bevindingen wel weten.

Hoi,

Iemand ervaring met deze module met homeseer?
Lees op forums dat er wat problemen mee waren in het verleden, opgelost?

yoja

Hi, raymonvdm, nice to hear you got it almost working :-) What kind of thermostat do you have? For example: Remeha iSense, Remote setpoint override is disabled by default and has to be enabled via the menu on the thermostat. There are stil some issues with the telnet communication, for example: OTGW...

@Maurice: looking forward to your icon modifications.

@raymonvdm: current script has no comport implementation. You can run OTmonitor for telnet access.

Hi Maurice,

Great Job fixing the telnet communication! I didn't have the time to look into this myself.

Attached is a small modification for the HS3 icons.

Yoja

Hi, Getting this error when running otmonitor a couple of minutes, using telnet minute to monitor: invalid command name "nu" while executing "$arg $val" (procedure "otdecode" line 19) invoked from within "otdecode data $type $id" (procedure "otmessage&quo...

Hi,

I may have the same problem:

http://www.domoticaforum.eu/viewtopic.p ... 462#p74731

For now I reboot the Pi every night (crontab)

Yoja

Hi, I am having some proplems with the telnet sesions. It looks like it gets corrupted when running for a certain period of time using the above HS3 script. apr-17 8:13:58 debugOTGW not recognized command: 1 apr-17 8:13:58 debugOTGW not recognized command: B apr-17 8:09:57 debugOTGW not recognized c...

Hi raymondvdm, I posted my version of the script http://www.domoticaforum.eu/viewtopic.php?f=75&t=7242&start=315 It has some issues, the connection with the telnet client gets corrupted. I have not have time to get into this. But it works with HS3. Maybe it works for you, and if not you can ...

Hi, Then I don't know what went wrong :-( I will monitor if I see the problem again. I have attached the first version of my HS3 script. I used a lot of the BLB_OT_monitor.vb script. The script will create al the devices, just make an event that triggers the script every minute with the parameters: ...

Hi, I am working on a script for HS3 but when testing I see some behaviour that I don't understand: When putting the gateway in temperature override (TT=20 or TC=20) PR=0 reports the override temprature. But after a minute or so, PR=O reports "N" (no override) The Isense thermostat still r...

Hi,

The OpenTherm Monitor software has MQTT. I have no experience with MQTT, but has anyone mode a connection
to Homeseer with this (HS3) ?

Hi, Today I connected the opentherm gateway, it works perfect! I only had to set the reverence voltage lower (1.042) (got error 03) and enable temp override on the iSence thermostat. I still have to make the connection to Homeseer, and play with the settings :-) Thanks Schelte for this nice project....

http://board.homeseer.com/forumdisplay.php?f=1115

DLNA manager for homeseer