Home Automation Domotica Forum Europe, Bwired Forum

Bastiaan, do you use all three at the same site, and did you split up your set of modules between those three Z-net controllers (so divide the z-wave modules over the nearest controllers), or do all three contain al z-wave modules? I did not take the time to check if the latter is uberhaupt possible...

Yep, in my possession for about 2 or 3 weeks now, major improvement reception-wise. Always had 2 Fibaro nodes (older doorsensors) that gave me some trouble about twice a week, no problems at all anymore. Great stuff, glad I bought it. Running HS3 on a Shuttle baritone.

Garage sale div Z-wave, Somfy, Fibaro, KIKA Brodit, iPhone 5 en 5s houder Mag los in de verkoop, maar liever een goed bod van een liefhebber die alles in een keer koopt. Alles werkt en is maar zeer kort gebruikt (weer over naar Homeseer, en veel getest met domotica vanuit hobby en werk, dus vaak maa...

I'm going to give it another bump: please post in this poll if you want an EU version! Just installed the UZB stick also, looks like I have better network coverage. But I do like the flexibility of an IP connected interface, so I still want a Z-net. http://board.homeseer.com/showthread.php?t=173012 ...

Great,
gone have a look into that too.

BTW: if you're looking for sending email, I switched over to pushmessages using Pushover, very nice! (and free)

Regards,
E

I must say: the manual seems to be updated, there's an extra table with more values, where param 14 needs to be 1000 to change the device to input (all channels?). Does not work for me though, only multilevel switch channels are visible.
Any help is appreciated.

Rien, probably not, allthough I did install through the updater. Had to start up my old HS3 system to check, and the version is at 3.0, so the updater did not install the right version. This was still the case at feb 19th, the updater did not show me a new version. I bought new hardware a few days l...

ok, problem solved, only managed to get a very old zwave.me wall transmitter to work. Can not get the WCD1's to work with Fibaro switches and dimmers, it's possible to pair both with HS3, but association to the actuators will not function. Maybe I'm missing a parameter, can't find out which. This wa...

Yep, do know how to use Google, tell me what you make of this: parameter 6: it's almost always value 0, doesn't matter if it's in, out or rgb. This only changes something regarding brightness, tried it of course but still only have output channels in HS3. parameter 14: interesting table, all values ...

I'm trying to control a Fibaro FGD-211 dimmer with a ZME_WCD1 wall transmitter, this worked with HS2 and Fibaro HC2. I cannot add the WCD1 to the HS3 network, not with the standard Z-wave plugin or with the latest beta. I also tried a ZME_WallC-S, I'm able to join this to the HS3 z-wave network, it ...

Anyone?

Akatar, didn't hear that before, thanks.
Maybe we can speed up getting the EU version, if you're also in need of this please post in this poll:
http://board.homeseer.com/showthread.php?t=173012

Hi, I've been using a windsensor in combination with a Fibaro RGBW module on a Fibaro HC2 system, but I am now switching back to HS3. How (and which parameter) do I set to make one of the input/output channels a 0-10v input? In HC2 this can be done from within the graphical interface, in HS3 I have ...

Bump!

Jeroen, wat is het uiteindelijk geworden, werk je nog met Android of inmiddels iOS? Ik ga dit ook doen, maar twijfel erg over het platform en grootte (7 of 10 inch). Ainol heeft mooie android tablets http://www.ainol-tablet.com/ainol-tablet.html , maar versie android loopt - iig out of the box - ach...