Home Automation Domotica Forum Europe, Bwired Forum

So that means that you got a way to get battery devices working with Homeseer? If so, could you help us out how this could be achieved? So long I have wr. this document ("To understand Merten CONNECT battery powered devices”) in cooperation with Rick from HomeSeer, so yes - Merten working OK w...

... Keep pounding on the buttons until you get lucky.... Olof Actually this is VERY wrong strategy to work with this units. You must clearly understand that you doing. The most important thing is that people dont use time to read "User manuals". As result (with Merten sender modules) many...

Read this document: http://www.smarthus.info/support/downlo ... en_bpd.pdf

I can say the same one more time:
Go to Configuration menu for respective ZWave.me switch.
In field " Parameter Number" - select 14
In field "Configuration value" - write 1
Click "Set" button
make test again (of course be sure that you have some associations for Gr. 2)

Action on button double press is Disabled as default. So you mast activate this feature in first place.
Look configuration possibilities for Parameter 14. Probably you must use Value=1.

Well, you can tray to flash unit again with new (Euro) firmware: http://aeotec.com/partner/z-wave-firmwa ... nd-edition

Hi all. Anybody remember that happens with Accumulated Power Consumption data on the Everspring AN158 switch after power loss? Will Accumulated Power Consumption data be "reset" to "0" after Power loss/Power ON or Accumulated Power Consumption data will just count as normal with ...

Look, they are alive: http://qees.eu/

vanisher wrote:The 3w spots are enough for 'sfeerverlichting'. The 6w spots are comparable with 50w halogeen spots.

Actually this is not correct (for today marked).
6W LED = ca. 35W halogen
9W LED = ca. 50W halogen
And of course here we talk about the best LED (chip) manufacturers as Cree, Nichia...

Perhaps it's configured to use Z-wave version 3.20 and higher only, in which case it could make it incompatible with z-wave 2.78 masters (like the Aeon stick or the Vera V1 and Vera V2). The Vera V3 for example is able to speak both 3.20 and 2.78, is it also unable to pair with that? I think it is ...

Is there another wall switch I could use together w/ HS for event control? Best regards L. You can use any of Merten battery powered wall, sender modules. In the HomeSeer this unit will be recognizes as Switch Binary and Group1 will be associated with HS. So this module will make "in real time...

I have no direct knowledge of PIR devices and there quality, but I've seen MoLiTe (Movement Light Temperature) 3-in-1 pir devices over at http://2ihome.com for a very affordable price (around EUR 30,-) and it's a dutch based company. Jelle All this products (2ihome WEB site) is OEM from Wintop (Chi...

jrkalf wrote:but is it technically possible?

Of course its possible. Or how Z-Wave.me do it???
But, just forget about it

TANE wrote:Almost 2 years after the launch the micro modules from Aeon Labs are available.
Window Control

You mean well - Motor Control module....

As I said before, if you will not use Merten brand, Bush-Jaeger can be also an option. You just take this one: http://www.busch-jaeger-catalogue.com/index.php?bereich=53347193&programm=53347662&gruppe=53347663&produkt=53347672 or this one: http://www.busch-jaeger-catalogue.com/index.php?...