Home Automation Domotica Forum Europe, Bwired Forum

---- MOD GRAF 24h ----
sudo nano /opt/otmonitor/otmonitor.vfs/otmonitor.tcl
# change set span = 86400 (t.j. 24h)
sudo nano /opt/otmonitor/otmonitor.vfs/docroot/graph.svg.tmpl
# change row 3 to min(86400, (t.j. 24h)

Hello, I am using the standard OTGW version with firmware 5.4 (PIC16F88) and web otmonitor v6.1. Since Google's support for less secure applications has ended, I have set new parameters for the SMTP server (that I use by default for mail communication and for notifications form other systems). After...

Thank you very much for new version!
Now I see some more LED working when gateway is in Monitor mode.

Hi Schelte, I've managed to test QAA73.110 and OTGW today. As you can see from the log below my OTGW was set to Gateway mode at 10:14:01, then I entered OEM's mode on QAA73 (in this mode I can change some LMU64 (boiler) values) at 10:14:45 and since that time I see only some strange values in the lo...

When I realized that only 1 LED is working I simply adjusted Room temperature +2 degrees, waited until boiler started to heat, then checked status page a saw Flame = ON and LED A was OFF. I was testing Monitor and Gateway mode with QAA73 so it's possible that device was in Gateway mode. I missed inf...

As for LED's I can confirm that my setting (below) is working since long time ago without any change (now on 5.0 firmware). (I don't have DS18B20 connected): ... Actually I should recall this statement. It looks like LEDs are somehow broken. I'm using Cyril's fork of OTGW (https://www.domoticaforum...

I will post logs for both cases during a weekend as it's not possible to physically get there now (covid rules).

As for LED's I can confirm that my setting (below) is working since long time ago without any change (now on 5.0 firmware). (I don't have DS18B20 connected): LED A: Flame status LED B: Transmitting an Opentherm message LED C: Setpoint override LED D: Boiler requires maintenance LED E: Central heatin...

GW=0 --> value 506 (TvSmin) is set to 20.0 C GW=1 --> value 506 (TvSmin) is set to 404.0 C Thank you for confirming this. I believe it's caused by setting QAA73 to "programming" mode and OTGW somehow interfering communication between QAA and LMU. It's only cosmetic defect found and does n...

OK. Thank you for clarification. You are right, I did not realize that I should upgrade to 5.0 firmware. I'm receiving Github notification when new OTMonitor is released and forgot to check http://otgw.tclcode.com/firmware.html website if new firmware is available too. Now PR=D returning PR: D=O. an...

Thank you very much for this! So far working like a charm. I'm not using DS18B20 as my boiler has external sensor attached, but testing command PR=D returns PR: BV. Is "BV" an abbreviation for not available or not connected? Is O or R used for any calculation in OTMonitor or it's replacing...

Just a quick update on this strange behavior - it looks to me that it's caused by OTGW setting GW=1 (gateway mode). I've made several tests with 2 different OTGW devices and found line 506 TvSmin with incorrect value 404 C only when OTGW in gateway mode. Switching back to GW=0 solved this issue. I b...

Hi Schelte, I've found only logs from 2 days ago and if I understand correctly that Message ID = Max CH setpoint boundaries I see this: ---------------------------------------------------------------------------------------------------------------- 00:30:54.087234 R80310000 Read-Data Max CH setpoint...

Hi All, I'm using latest OpenTherm Gateway (4.2.8.2) + OpenTherm Monitor 4.5 with Geminox THRi 2-17 M75V (Siemens LMU64) and QAA73.100 controller. As my boiler does not support Remote override room setpoint functionality, I'm using OTMonitor as MQTT client which sending data to Home Assistant. Some ...

Thank you. I feel like I'm ignorant, but found it 30sec later :-) I need to improve my reading with understanding skills. I also found some new sections in otmonitor.conf file, what is is for?: view { tab graph order increasing sort name bitflags true } firmware { hexfile {} } fsdialog { duopane 0 r...