Home Automation Domotica Forum Europe, Bwired Forum

try to exclude the plugs first and then include.

case closed!

b_weijenberg wrote: ↑Fri Jan 20, 2023 6:04 pm Die werkt niet met de RFXtrxLAN.
misschien is de RFXtrxWifi-RFX433 een oplossing en stuur anders een email dan kijk ik of er een mogelijke oplossing is.

Dat is de reden dat ik een xl zoek, ik ben niet van de wifi namelijk.
Ik stuur je een mail.

b_weijenberg wrote: ↑Fri Jan 20, 2023 10:31 am RFXtrxUSB-RFX433 is de vervanger van de RFXtrx433XL

werkt deze met:
http://www.rfxcom.com/epages/78165469.s ... ucts/21201 ?

gezocht:
een rfxcom rftrx433XL -> en dan specifiek deze versie, dus niet de E versie.

i use ip adres without port and not localhost with port
and the port number at brokerport

can you see them in the source?

almost all my circles have 2011 firmware and one has 2015 firmware
one of my sticks has 2011 firmware, the other stick has 2014 firmware, they all work

plugwise source is 2.40

The high voltage from the boiler is below the default reference voltage. That means the line level always registers as "low". You may need to use the VR=3 command, or even VR=2 to set the reference voltage to 1.216V or 1.088V. That still keeps the reference between the voltages from the t...

That shows the evohome is communicating with the OTGW just fine. But there is no communication between the OTGW and the boiler. Check the connections on that side. Measure the voltage on the boiler terminals of the OTGW. You should find around 6V. You can also try different VR settings. To take a m...

The stick is also being used by the plugwise pro plugin, it does not use the source software.

EvoHome with R8810 OT Gateway should work. The OTmonitor log may provide clues. The log is filled with: 18:50:13.393768 T00030000 Read-Data Slave configuration (MsgID=3): 00000000 0 18:50:14.389960 T00030000 Read-Data Slave configuration (MsgID=3): 00000000 0 18:50:15.387740 T00030000 Read-Data Sla...

I bought myself a opentherm gateway with the PIC16F1847, The problem i have is that my evohome opentherm module goes down in a couple of seconds (3 red blinks, no communication with the boiler) I use the last firmware for the gateway, is there anything i can do to solve this? I used an old gateway y...

Op marktplaats staan ze nog wel, de V2 was of gratis of voor weinig geld te upgraden naar v3

Dus wel even vragen welke software versie op die P1 draait.

hvxl wrote:Misschien is dit een alternatief: https://espirp.tclcode.com/. Als bouwpakket te koop bij de Nodo-shop.

Interessant, zelfs mqtt
Die nemen we in overweging.