Home Automation Domotica Forum Europe, Bwired Forum

normal: close the source and start plugwiseupdate.exe if that doesn't work you need older source software. That worked, starting the updater exe directly. Now this 2009 module is also updated to the 2011 firmware version, and that seems to be the latest version available for this hardware, which se...

Still, im in the same boat. Got some plug's and would like continue to use them on HS3 I still have one plug I never used. Wanted to update it recently, as windows 7 is EOL soon too, just to be sure. It detects outdated firmware, however the update button is 'grey' (in v2.23). Today I downloaded a ...

Thus, if I get it correctly, as you are directly talking to the plugwise stick over serial, your data never leaves the network aka goes to the 'cloud' right? Yes, that is right. However you stil need the plugwise-source-software to configure your network (and add modules). But once it's configured,...

Another thing for your TODO list that can be very interesting for remote-control and thus home-automation too is of course IPv6; Agreed :) Offcource IPv6 is just for fun now, but for home-automation it might indeed be useful for to have it too in your home-lan. Just out of curiosity; I am using an ...

raymonvdm wrote:I think 99% of the colocation company`s is providing ipv6 now a days. If not you`re in the wrong place anyway

From looking at the IP, domoticaforum is running at a Hetzner DataCenter, so IPv6 should be there, just not enabled for the website, it seems.

I will check it out, but probably costing me more [...] Yes, it will cost you mainly some time, and a yearly update. See How to obtain and install an SSL/TLS certificate, for free for a preview of what to do, it is a nice read too. I do find the things you need to do for validation a bit messy, but...

I have discovered some additional commands. You can use portmon to capture the ASCII stream (up to 230 char per line) between the application and the emulated comport. Then convert the logfile using a small vbscript to something more readable, and look into it to discover what happens, e.g after doi...

Yes, the function for 0057 is called PWSetMeasurementIntervalRequestV1_0 in the code. And 0058 is called PWClearGroupMacTableRequestV1_0 Do you know more official names for other commands, and the meaning of the bits in the flags dword in a 0000 reply? But that discussion is beter in the old 'proto...

@ roheve: Why do you want to know the coding of the interval? The only question was how to change the interval for a module to 5 minutes. And I explained how to do that. Yes, you did. Took me a bit of reading in that other forum (where it was a bit of a different subject, 'extended scripting', and ...

After a firm meeting we have made the decision to put in an option that makes it possible to disable the use of the cloud. So as default it is set to use the cloud and we will be adding the option to NOT use the cloud. [...] Iwan Would it be possible to substitute the cloud url with your own (inter...

I noticed that the forum does not use https, not even when editing preferences and changing the password. I am in the proces of transfering the data from my password protected spreadsheet file to a passwordsafe tool, that is why I noticed while changing the password. For https you need a certificate...

Ok, found two new protocol commands, 0058 with 4 two hex chars as parameter (only seen 00) and 0057 with four chars as parameter (only seen 0000). SEND 0058 <mac> 00 RECV 0000 1201 00F9 <mac> SEND 0057 <mac> 0000 RECV 0000 1207 00F8 <mac> no clue yet how the time-period for archiving is encoded.

By clicking differenty I found a downloadlink at 'myplugwise' and downloaded a new 2.23 version, but different. Now my 2.23 is a september version instead of the march version. Looks the same, through.

DekkerAldo wrote: [...]
To check whether the additional licence works I have added
<% echo 'Plugwise FeatureFlags ', Plugwise.FeatureFlags %>
[...]

I checked this too. No 'E' detected, but {W,X,W,H}, with and without the change.
But I am not realy interested in the website, as it runs on windows only.

On the plugwise site I see a 'desktop app for windows' which appeard to be a version 1.6.7. But here in the 'old' source 2.23, I do not get an update message. Is this an entirely different program? In the configuration, I do see the 25 to 250 circles license (did not notice that option before). My v...