Home Automation Domotica Forum Europe, Bwired Forum

HA has a very limited support for only one RFX433XL.
The old RFXLAN is not supported in HA.

I don't know HA but are spaces allowed in the event?

Die werkt niet met de RFXtrxLAN.
misschien is de RFXtrxWifi-RFX433 een oplossing en stuur anders een email dan kijk ik of er een mogelijke oplossing is.

sorry, you are right. A new RFXmngr will be available soon on the downloads page.

RFXtrxUSB-RFX433 is de vervanger van de RFXtrx433XL

Use the latest RFXmngr:
20-1-2023 09:28:05:129= Curtain command: 07 18 00 03 41 03 00 00
================================================
Packettype = Curtain1
subtype = Harrison
Sequence nbr = 3
housecode = A
unitcode = 3
Command = Open
Signal level = +10 dBm

PM gestuurd

Hi Harry,

Ik heb een CM11 voor je beschikbaar met daarbij:
1 AD10
7 LM12
4 AM12
1 FM10
1 UM7206
1 PLC-R2263E
1 PLC-R2264E
2 PLC-R2267E

Voor 60 euro incl verzendkosten

Powercode 868 is supported by the RFXLAN 868 receiver and RFXtrx868XL

This sensor should be received too:
Frequency (MHz): 315, 433, 868.95.
Communication Protocol: PowerCode

PM gestuurd

De RFXCOM HS3 plugin moet ook in HS4 kunnen werken

I think you only can have an ID 00 to 0F
Check with RFXmngr.

easiest way is to use a RPI 2 or 3 and install ser2net Disable Serial Console (if configured) ====================== sudo nano /etc/inittab insert a # sign in front of this line: T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100 ctrl-O Enter ctrl-x Remove console (if configured) ============== sudo ...

KAKU modules with a type A... are controlled by the RFXtrx433XL using the AC protocol. Check with RFXmngr if the KAKU commands are received with AC enabled and control the KAKU using Lighting2 - AC I suppose you find an answer on the openhab forum: https://community.openhab.org/search?q=klikaanklikuit

contact support RFXCOM