Home Automation Domotica Forum Europe, Bwired Forum

te koop, inclusief antenne en usb kabel

eur 60

Zie marktplaats marktplaats.nl/a/doe-het-zelf-en-verbou ... ousPage=lr

De rfxtrx is verkocht, deze post kan op slot

Somfy RTS can be controlled by RFXcom. Somfy IO iswed by Tohoma is still a closed protocol. It would be nice if the Somfy IO protocol could be used on other devices as well. I do not want the Tahoma BOX and soldering is also not the road I wish to follow. Some people are trying to hack the Somfy IO ...

Hi,

I saw this solution: http://zil.olammi.iki.fi/sw/dialEye/. This should work for the Elster M100 water meter or probably any analog watermeter. Cons are you need to buy a cheap IP camera and need to run Python. Pros are that it will save you some plumbers work on the water piping.

Mark

Zie PM

Thanks Nlrb, this works. Only thing I did not know was to use the configured port instead of 23.

Hi I also have the TCP232-T installed http://en.usr.cn/download.html . It works great but I can not flash the Opentherm Gateway using this connection. I get the following messages after starting the firmware programming: 1) Please Manually reset the OpenTherm Gateway I remove the power and put it ba...

I have it the other way arround. I have a Uk powermax pro with a dutch keypad. This combination works fine. I bought some of my devices in the uk because thy recheaper there. Most of the uk shops will send to europe. Shipping charges are high so you haveto buy more stuff to vet a good businescase.

Bwired wrote:Could somebody check if Tapatalk is working on this forum, just installed it.
thanks

Thanks for adding tapatalk suport

Verstuurd van mijn ASUS Transformer Pad TF300T met Tapatalk

You can do it yourself have a look at forum.micasaverde.com/index.php/topic,1 ... l#msg93816.

I noticed Homewizard supports Somfy http://www.homewizard.nl/zonwering.html. Most devices they support work over 433mhz? Did they reverse engineer the Somfy protcol or did they buy the protcol? What they did, can this be done for RFxcom as well?

Maybe you could ask a question at http://www.alarmforum.de. Otherwise set Google to search only German pages with Visonic as your keyword. You will find serveral shops like shop.strato.de/epages/15435740.sf/de_AT ... 0868MHz%22. Mark

I got the Powerlink2 sending e-mail, see domoticaforum.eu/viewtopic.php?f=68& ... 314#p55314.

Mark

I was a bit surprised by the above documentation that Visonic promotes their My Visonic App so actively. This means the Powerlink2 can be registered directly at Visonic.com (without a service subscription at a alarm-station ??? ). I found this thread http://www.diysecurityforum.com/index.php?topic=2...

I didn't want to change too much as the current setup works fine. The Ajax-Kidde heat/fire detecters are integrated in the House and make use of the 220Volt, which I considered as a plus. This setup has about now the same functionality, though less userfriendly. EG Ajax-Kidde also manages the batt s...

If you have the rs232 option for the Powermax it might be interesting to know that in January 2012 Visonic released a new version of the Remote Programmer. Don't know what changed in this release. It can be downloaded directly from visonic visonic.com/download-center/type=59730/ ... 730/page=1 The f...