Home Automation Domotica Forum Europe, Bwired Forum

Hi colintd, thanks for sharing, I got it up and running at with a culv3, Serial terminal at 115k and vl +cr @neilcoggins and DanD I might be wrong, but as far as can remember its rfbee <<.>> evotouch <<.>> hr80 rfbee injects on the evotouch and not direct to the hr80. Atleast that is how i do rememb...

ISE kan je tzt ( het is pas in feb 2017 ) online genoeg kaarten vinden.
Ik was vorig jaar erg onder de indruk van de grote en het internationale karakter.

Het leukste aan de beurs in Eindhoven was het domotica diner en het ontmoeten van de forum bezoekers.

Ik ga dit jaar weer naar ISE in de Rai.
Veel meer te zien...!

https://www.iseurope.org/

Well i am using the FTDI converter that came with the jeenode workshop years ago. ( not sure if you where contender ) Make sure it does 3.3v! I had loads of fun with it already and flashed many alternative firmwares on many devices. So its a good investment. Just make sure you also place the jumper ...

You could use espeasy and a ftdi serial converter ( just make sure you use a 3.3v version ) I still had one laying from the jeenode workshop ( al these 3.3v sensors and stuff work fine on the esp with out level conversion ) http://www.esp8266.nu/forum/viewtopic.php?t=626 i got that one running on my...

Hey Noel, Always willing to help but, to be honest i think sla is not going to work as you want a closed construction..... Dome will deform due to the resin that stays inside the dome while the lift is going up and down and the effect gets stronger while the dome tries to closeup those last layers. ...

Omg, i would like to have this one.... but i am living in Purmerend ( world famous village because of the terror Uhu ) so i better skip on this one :D About customs, every postal company here in the NL is having their own customs department thats authorized by the dutch authorities. postnl and china...

Very sweet, and creative !!
But most of all clever done, saves you on flowers.... you simply give the led a different color

Nah, serious i like the creative re use of materials and i would never think of flattening glass with a torch !
Nice one

I did not made mine, but just bought it ;o) included the ldr http://www.cnx-software.com/2015/12/14/3-compact-esp8266-board-includes-rgd-led-photo-resistor-buttons-and-a-usb-to-ttl-interface/ I did buy mine at ali express. Running espeasy from esp8266.nu Jeenode pir can also be re used perfect... 5v...

never mind... wrong item

drope me a line at my hotmail.com account.

r_255

No that's true.... but there are not that many devices out there that will do that perfect. The Fibaro tries to be as efficient as possible but does not work proper here either... unless i feed it batteries every month :D But there is hope, as i am in really am impressed by the hue tap. that generat...

I am testing this one: http://www.banggood.com/ESP8266-Gizwits-Development-Board-Photoresistor-SDK-APP-For-Arduino-p-1025662.html You could set the interval time manualy in seconds. dirty cheap ($2,50 bought mine on ebay ) and could spit out the ldr data in mqtt style on the espeasy firmware... ( fr...

Hi, i dont know about GW_ID and SYNC_WORD but i do know that data is send by device id...... So you dont need to pair them. As domoticz should inject this into the send msg. based on the data it receives. Best advice i can give is compare the received packets with the outgoing ( have a look at the d...

Cheers!