Home Automation Domotica Forum Europe, Bwired Forum

I'd be interested.

Regards, Pieter-Paul

Maybe a silly question: Are you using the different house codes?

Has anybody gotten an automated setup like described in this thread to work with a Stork CMFe or similar device? Unfortunately I didn't and I have had to undo my automation changes. I am now back to the original setup with 1 switch in the kitchen and having to go downstairs before getting a shower i...

The extended code syntax for the CTX35 is pretty simple. The format is: "Letter Code + "[N]" + Unit Data + Data + Command +Type" (e.g. www.bwired.nl/images/how/ctx35.pdf), where 'N' is always '1' (extended command set 1), 'Letter Code' and 'Unit Data' together give the device cod...

I am lost. I have fitted the VIX10 and two SAIX12 switches (not using the input, just using them as if they were SAX1's. I checked (with a voltmeter - ventilation unit not yet attached) that when both switches are OFF, there is no power on L1 or L2 (righthand connectors of the perilexbox, both are 0...

Does this also work with Linux on the PC? I'm most likely going to be using xPL-perl (as I haven't found other SW that supports the CTX35 yet).

Cool, that is really useful. Thanks for the quick reply.

Hi Bert, others, I have a question regarding the optional serial interface on the Ethernet RFXCOM device. Can it be used to attach a CTX35 to? So the PC connects through Ethernet to the RFXCOM device, and through that to the CTX35. Reason I am asking is that I am having problems with the CTX35 on my...

Hi DJF3-2, Thanks for the clear picture of your solution. I would not like the fact that you cannot switch the ventilation unit with both the existing switch and the SAIX at the same time. I would personally find it annoying, but more importantly I would have a hard time explaining how this is a nic...

I am also planning to have an A10 module (SAX1) for switching my home ventilation between setting 1 and 3 (no need for nr 2). If I attach the SAX1 in the Perilex box of the ventilation unit, I can enable/disable it with a remote (for example). But what happens if I then use the existing (non-X10) sw...