Home Automation Domotica Forum Europe, Bwired Forum

Aangeboden Reolink camera's:

• Reolink RLC420 4MP (nieuw) - prijs 20 euro
  Reolink RLC422 5MP (nieuw) - prijs 40 euro
  Reolink RLC422W Dualband WiFi 5MP (verkocht)

Exclusief verzendkosten

Cool! This makes a Toon2 interesting now.

I got it working in domotiga for most part, but the detection is not 100%. Just have look into to the code and B0 messages. You also need to enable something on your pir, also recommended not to have too many pirs near each other (then domotiga does not know which one is triggered)

No, because it is encrypted communication between the powermaster and the pir

following is vers promising:

https://github.com/Koenkk/zigbee2mqtt

I assume your Z-Wave devices are battery powered (then they sleep 99% of the time). Open-Zwave only passes on the open/close signals if the device is fully discovered ... So you need to wake-up your devices and afterwards it should work. Yes - it is a b***** if your restart HASS.io, then you need to...

Yes, you can use RFXCom and Z-Wave at the same time ... your domotica application should be able to handle this. The Bosch alarm is difficult to say, first google search doesn't seem to show the option to arm/disarm it remotely.

Anders zou je kunnen kijken naar MySensors:
https://www.mysensors.org/build/pulse_water

Excellent Next 'question', you can still update to firmware 3.0/3.2 without subscription (i read a vpn tunnel should exist?)?

Does anybody know if it is possible to start using the Toon (and then root it ofcourse) without activiting it first with Eneco? My unit isn't activated yet

The format should be identical to the regular event messages, see the visonic protocol decoding for more information ...

Zoals de titel zegt, gezocht een PowerMax Plus centrale voor een heel klein prijsje (ik wil hem gebruiken voor testing)

email verstuurd

I checked the manuals (https://www.visonic.com/Data/Uploads/PowerMaxPro_User_Guide_Partition_II_D302542.pdf), but it doesn't seem to be possible to switch on arm/disarm mode. So you need to connect your powermax to a home automation system, and use that to switch the KlikAanKlikOut. I only know Vera...

Good News it is working now :D BTW: you don't need to buy the powerlink, but the serial connector visonic is normally the 'easiest' way of connecting it ... that one works out of the box. I use both, the serial connector and a usb to ttl, and the serial is more stable then the usb-to-ttl on my syste...