Hi logger2,
there are different type of meters in the world .
Some of them send the Data without request and some would like to get a request for the Data.
What is the name/type of your meter?
Regards
Udo
Search found 11 matches
- Mon Mar 18, 2013 8:55 pm
- Forum: Smart Metering Forum
- Topic: Reading the IR port of an IEC 62056-21 Smart Meter
- Replies: 41
- Views: 83197
- Sun Mar 17, 2013 11:28 am
- Forum: Smart Metering Forum
- Topic: Reading the IR port of an IEC 62056-21 Smart Meter
- Replies: 41
- Views: 83197
- Sat Mar 16, 2013 11:45 am
- Forum: Smart Metering Forum
- Topic: Reading the IR port of an IEC 62056-21 Smart Meter
- Replies: 41
- Views: 83197
Re: Reading the IR port of an IEC 62056-21 Smart Meter
Hi logger2,logger2 wrote: do you have a small schematic ?
have a look to volkszaehler.org . There you find schematics under hardware.
Regards
Udo
- Tue Mar 05, 2013 12:26 am
- Forum: Smart Metering Forum
- Topic: measuring gas/water (Landis & Gyr B25/ZMF120AC)
- Replies: 30
- Views: 38397
Re: measuring gas/water (Landis & Gyr B25/ZMF120AC)
Hi,Maverick wrote:==> 6000<\r><\n>
is it a typo? 6000<\r><\n> ? You have to send <6>000<\r><\n>
Did you try http://www.meter-test-equipment.com/dow ... 07pack.exe ?
Regards
Udo
- Sat Jan 05, 2013 1:15 pm
- Forum: Smart Metering Forum
- Topic: Reading the ZIV METERING 5CTDE1F Meter (IEC 62056-21)
- Replies: 8
- Views: 10887
Re: Reading the ZIV METERING 5CTDE1F Meter (IEC 62056-21)
Maybe you (udo) are the designer of this head? What are the improvements of the new version? Happy new year to you too. Yes, I'm the designer. The new version has increased receiver sensitivity and the components are cheaper. Fine that its working now for you. After the start message: <---10 49 01 ...
- Thu Dec 27, 2012 12:46 am
- Forum: Smart Metering Forum
- Topic: Reading the ZIV METERING 5CTDE1F Meter (IEC 62056-21)
- Replies: 8
- Views: 10887
Re: Reading the ZIV METERING 5CTDE1F Meter (IEC 62056-21)
I'm sorry. But there are many publications about IEC60870-5-102 in the net.Javierete wrote: IEC 60870-5-102 protocols... probably do you know something about it?
Regards
Udo
- Mon Dec 24, 2012 7:01 pm
- Forum: Smart Metering Forum
- Topic: Reading the IR port of an IEC 62056-21 Smart Meter
- Replies: 41
- Views: 83197
Re: Reading the IR port of an IEC 62056-21 Smart Meter
and that not my hardware is faulty? Hi Jeroen, For a first test you should keep your ir-head 1-2 cm over a white surface. Then, with Hterm or another serial client, send a few characters, this should then be displayed again in Hterm. Use the baudrate you have to use for your meter. If so, your ir-h...
- Mon Dec 24, 2012 2:16 pm
- Forum: Smart Metering Forum
- Topic: Reading the ZIV METERING 5CTDE1F Meter (IEC 62056-21)
- Replies: 8
- Views: 10887
Re: Reading the ZIV METERING 5CTDE1F Meter (IEC 62056-21)
The schematic and board I used is: http://wiki.volkszaehler.org/hardware/c ... b-lesekopf all components are the same except R2 2.2K instead of 2.4K (no stock). Hi, I do not know if at that time the new circuit was already online. There is a better version of the IR-head: http://wiki.volkszaehler.o...
- Mon Dec 24, 2012 1:59 pm
- Forum: 1-Wire Forum
- Topic: S0- and 1Wire-Extension for Raspberry Pi
- Replies: 0
- Views: 5455
S0- and 1Wire-Extension for Raspberry Pi
Hi all,
have a look to http://wiki.volkszaehler.org/hardware/c ... rweiterung
There you find a project about logging S0-Impulses and 1-Wire-Sensors with Raspberry Pi.
Regards
Udo
have a look to http://wiki.volkszaehler.org/hardware/c ... rweiterung
There you find a project about logging S0-Impulses and 1-Wire-Sensors with Raspberry Pi.
Regards
Udo
- Fri Dec 07, 2012 12:14 pm
- Forum: Smart Metering Forum
- Topic: Reading the ZIV METERING 5CTDE1F Meter (IEC 62056-21)
- Replies: 8
- Views: 10887
Re: Reading the ZIV METERING 5CTDE1F Meter (IEC 62056-21)
Hi, Do you think I'll be capable of reading the data? Yes, you can... ;) BTW the cable they sell is very expensive (about 200 euros) maybe anyone have an schematic? What do you mean with "cable"? If you want to read out the data of the meter, you have to use the ir-port. Thats the two LEDs...
- Fri Jun 22, 2012 12:53 pm
- Forum: Smart Metering Forum
- Topic: Reading the IR port of an IEC 62056-21 Smart Meter
- Replies: 41
- Views: 83197
Re: Reading the IR port of an IEC 62056-21 Smart Meter
My guess is there is something wrong with either your computer COM port or the connected IR probe. Did you confirm you are using the latest drivers (for the IR probe/COM port)? Or have you already tried adjusting COM port settings, like enabling or disabling FIFO, I/O buffer size etc? Perhaps the I...