Home Automation Domotica Forum Europe, Bwired Forum

Hi,

I've create an HS3 MySensors.org controller plugin.

http://forums.homeseer.com/showthread.php?t=171425

Please take the plugin for a spin and let me know how it works. Please note that the plugin is still under development.

Best regards,
Henrik

Hi, I located an issue with the 02p BLB_Max_monitor 02.vb script - when trying to to change the temperature to 4,5c it fails. The issue is in line 448: ElseIf Val(s_roomc) < 31 And Val(s_roomc) > 4 If debug > 0 Then hs.WriteLog("debugn4b s:", CDbl(s_roomc) ) s_roomc2 = Dec2Hex(CDbl(s_roomc...

Hi, The end ... The TL-MR3040 setup was unstable due to issues with the USB connection - it worked for 24 hours at best. Tried a similar setup with a Raspberry Pi running Raspbian , but after three days the Wifi connection died ... so I bought the MCX-610 and it is working (also with Key Fobs) with ...

A small update to the story about the TL-MR3040. The OpenWRT website http://wiki.openwrt.org/toh/tp-link/tl-mr3040 mentions that the USB connection on the TL-MR3040 is unstable when connected to a serial2usb chip e.g. the FTDI FT232RL chip in the RFXCom receiver. I can confirm that the connection be...

I bought the TP-Link TL-MR3040 today. I have the RFXCom receiver connected to my HomeSeer installation through the router. It was fairly straight forward to get it working. Install the lastest OpenWRT build Configure the router as a client for my existing WiFi network Install the FTDI drivers Instal...

Fantastic! Thanks ... this is getting better and better :-) It is a much more clean approach with the build-in support in HomeSeer (RFXCom plug-in). Just tested it and it is working perfectly. I'm considering these two devices for connecting the RFXCom receiver to my WiFi network: TP-Link TL-MR3020 ...

Hi, A lot of things to consider ... I went down a different route ... why not move the receiver instead and connect it to a Raspberry Pi with a Wifi dongle? How to ... one more project :-) And to Google I went ... today I managed to make a successful test setup with the RFXCom receiver connected to ...

Thank you anyway I'll make an update to the thread if I find the answer.

Hi, Thanks ... but what about key fob support? It is explicitly stated key fobs aren't supported by MCX-600. Units can be enrolled on the MCX-610 whereas the MCX-600 seems to simply relaying whatever it receives. I guess that MCX-610 then limits the issue of duplicate messages as mentioned in the li...

Hi, I'm looking into extending the range of my Visonic Key Fobs (MCT-234) connected to my Homeseer system through the RFXCom Visonic receiver. Can I connect a Visonic MCX-610 repeater with the RFXCom Visonic receiver? MCT-234 -> MCX-610 -> RFXCom -> Homeseer Let's assume that no Visonic panel is par...