Home Automation Domotica Forum Europe, Bwired Forum

But Joep, i realy love your webapp! Big compliments. I would love to use your design and layout. So if you are willing to share.. Thank you! I decided to create a webpage with my experience writing the back-end and this app. Then you can make it yourself with examples and I don't have to upload the...

The code is custom build on my selfmade domotica system. It's not a framework, so you have to change and fiddle a lot to make it work on standard systems or other home-brew back-ends. Shown screen is just the OTGW part, I have everything incorporated, from lights, door-sensors, weather station, movi...

I'm not sure what other users are using for their OTGW interaction? For two months my OTGW is in production. :P I own the Honeywell Vision Touch thermostat as well and wrote a little script to reset to the program when the override time expires which I set on my phone. The back-end of my domotica s...

Thank you so much. I'm going to experiment with it asap. Also with the Honeywell vision, but it's so busy at work past months I don't get to it

I could not find it after lots of searching. Thank you I'll look in de specification, stupid I didn't Google for that. Sorry, feel dumb now

At the moment I'm working on a PHP script to read-out the 'PS=1' command and put it to JSON. This file I use with jQuery to make the data realtime in my new HTML 5 app. The otdata.txt file from otmonitor.exe shows with a 1 or 0 if the CHmode is enabled, DHW mode is enabled and if the flame is burnin...

Do you guys update the firmware over a serial->LAN interface? Or is this to tricky and for updates you connect it directly to the serial interface of the computer?

Thank you, I'll test that and report the results.

But what does the SR command do?

I want to test too, but I don't get the HB & LB on MsgID 100 messages talked about in earlier posts. And I don't get the SR command. I searched for a guide or reference, but I don't get it. Am I missing something? How can I test it correct?

Great News!

I experienced that too. And when I send TT=0 there is no visual distinction as the temperature changes back to the value set by the current program and the HomeTronic symbol disappears.

@RedNax; I'm also testing with this thermostat at the moment and experience the same thing. When I send TT=21 (for example) the thermostat sets it's temperature to 21 and the message "following program" keeps on the screen. When I set it by hand the message "temporary" appears on...

I had the idea when I request the data via JSON (for example http://myserver/json), the otmonitor program outputs the latest data in JSON format. With otdata.txt written every 30 seconds there is i/o load and you have to setup a location for the textfile to read with a script or PHP/ASPX page. When ...

I have the same thermostat (Honeywell Vision Modulation Touch) and i thought it worked a few day's ago and yesterday it didn't get back to its program after sending a TT= command to increase the temperature. Also, as earlier talked about, it only accepts full degrees. I'll do more testing. A questio...

The boiler reported: Main frequency error. The print may have been defective. Replace it. That does sound scary. I can understand your trepidation. You may send the logs directly to me. I will let you know my email address via PM. Thank you very much for the great support. It's better than the supp...