Home Automation Domotica Forum Europe, Bwired Forum

Ok but this is still showing that the DNS is working now.
Just leave it for 24hours on this script now please. It should request an update within 24hours if I am not mistaken.

I think just adding it to /etc/hosts is enough
So add a line "172.17.1.100 feed.hae.int" to that file and check with tcpdump if that indeed is reponsded back as the question comes in.

I do believe the toon does a update check every 24h hours, even when it is not activated yet. Please keep trying. It does need a valid dns response for feed.hae.int to work in this situation as it has never had a valid response yet (because it is recovered). To check the firmware in the installation...

Is it already on 6.0.9 now? It requests the time server dns from this firmware.

For dnsmasq, I think you just can add the line to /etc/hosts and dnsmasq will then use that a response.

Toon2 zou niet last hebben van lege bestanden. Kijk even (met 'ps aufx') of chrony wel draaid

There is a pre-release batch which has other config/certificates. Useless for rooting. Seems to me you have one of these. Small chance that you can still root without activating. Keep the toon connected to the root wifi and have the script running. It should request an update once every 24 hours. Al...

Check the update log file in /mnt/data/update dir

if the /etc/opkg/arch.conf file contains nxt it is a toon2. If it has qb2 it is a toon1

At the moment you connect a 4.9 Toon2 to wifi it immediatly starts download the update again. Which will cause problems with opkg install dropbear as you notice. Reset to 4.9 and don't connect to normal wifi. Directly to the toonrooter wifi and make sure the script is running before connect the toon...

Your toon isn't trying to install dropbear. It is trying to install a package from an update. Please finish the normale update of the toon before installing dropbear.

For the toon1 this is possible. Have to look how exactly again, but you would need something to write a file with the raw temperature and point the config of the toon to this file.
For the toon2 it is not possible. It is working differently

Please keep using toonrooter. Don't go down the rabbit hole you think you need to go.
Just read the readme of toonrooter because I think you just forget to read evertyhing. The solution for your input/output problem is there.

Dat zijn wel heel veel berichten en vast te veel voor het beperkte geheugen van de toon waardoor hij blijft rebooten.
Is hij geroot?

Ok if it works for you with the current password it is fine. Some users need to get the API key on the myenergi website.

There is an zappi toon app update.
Also make sure you are using the Zappi API key as password from now on and not the app password