Control happ_thermstat boiler setpoint

Everything about external control, apps, VNC, etc goes here.

Moderators: marcelr, TerrorSource, Toonz, TheHogNL

Control happ_thermstat boiler setpoint

Postby knug2 » Mon Jun 29, 2020 10:55 am

Currently im building a zone regulated heating system.

I would like to control/override the 'boiler-setpoint' of Toon, is this possible? For example : http://<IP>/happ_thermstat?action=setSetboilerSetpoint=4000?
knug2
Starting Member
Starting Member
 
Posts: 18
Joined: September 2019

Re: Control happ_thermstat boiler setpoint

Postby TheHogNL » Mon Jun 29, 2020 12:26 pm

knug2 wrote:Currently im building a zone regulated heating system.

I would like to control/override the 'boiler-setpoint' of Toon, is this possible? For example : http://<IP>/happ_thermstat?action=setSetboilerSetpoint=4000?


This wil set the settemp to 22 degrees and turn off the schedule:
Code: Select all
http://<IP>/happ_thermstat?action=changeSchemeState&state=0&temperature=2200


This wil set the settemp to 22 degrees only during the current scheduled state:
Code: Select all
http://<IP>/happ_thermstat?action=changeSchemeState&state=2&temperature=2200
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1537
Joined: August 2017

Re: Control happ_thermstat boiler setpoint

Postby knug2 » Mon Jun 29, 2020 12:39 pm

@ TheHogNL Thanks for your reply.

But this is just the 'room' setpoint.

What I need/want too change is the 'boiler' output temperature ( eg 60 degrees out ).
I need to override the calculated boiler setpoint value by Toon.

Curious if this is possible, otherwise I will use an OTGW to override the boiler setpoint. But I prefer to only use the Toon if possible.
knug2
Starting Member
Starting Member
 
Posts: 18
Joined: September 2019

Re: Control happ_thermstat boiler setpoint

Postby TheHogNL » Mon Jun 29, 2020 1:00 pm

knug2 wrote:@ TheHogNL Thanks for your reply.

But this is just the 'room' setpoint.

What I need/want too change is the 'boiler' output temperature ( eg 60 degrees out ).
I need to override the calculated boiler setpoint value by Toon.

Curious if this is possible, otherwise I will use an OTGW to override the boiler setpoint. But I prefer to only use the Toon if possible.


Ok that is impossible I am afraid with the toon.
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 1537
Joined: August 2017

Re: Control happ_thermstat boiler setpoint

Postby knug2 » Mon Jun 29, 2020 1:47 pm

OK, unfortunately.....

Is there somewhere a list (besides this one : domoticaforum.eu/viewtopic.php?f=97& ... tat#p94570 with all the available commands that can be executed trough happ_thermstat?
knug2
Starting Member
Starting Member
 
Posts: 18
Joined: September 2019


Return to Toon external control

Who is online

Users browsing this forum: No registered users and 1 guest