Toon is not opening on laptop

Everything about external control, apps, VNC, etc goes here.

Moderators: marcelr, TheHogNL, Toonz

Post Reply
witteherder
Starting Member
Starting Member
Posts: 25
Joined: Thu Jan 10, 2019 2:28 pm

Toon is not opening on laptop

Post by witteherder »

Hello,

Yesterday I did installed my rooted Toon1 and some Neo Coolcam Powerplugs.

Now I have the following problem:

I did allowed in "Instellingen"- "Internet"- "Allow for 2 hours" and saved
I have the ip adres 192.168.2.20

If I open this in Firefox I will get error 404 - Not Found

Do i forget something or do I need to do something extra?
Toon 2 Rooted User
Firmware version: 5.94.7
Raspberry Pi 3B+
Domoticz 2022.1
10 Neo Coolcam PowerPlus
Domotica Beginner (need little help in beginning)
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: Toon is not opening on laptop

Post by TheHogNL »

witteherder wrote:Hello,

I did allowed in "Instellingen"- "Internet"- "Allow for 2 hours" and saved
I have the ip adres 192.168.2.20
If you followed the rooting guide you don't need to open the toon from the GUI.

Check your /etc/default/iptables.conf if you opened port 80.
And also check /qmf/etc/qmf_release.xml if you alloweda all urls ( enforceWhitelist on 0)
Member of the Toon Software Collective
witteherder
Starting Member
Starting Member
Posts: 25
Joined: Thu Jan 10, 2019 2:28 pm

Re: Toon is not opening on laptop

Post by witteherder »

If you followed the rooting guide you don't need to open the toon from the GUI.

Check your /etc/default/iptables.conf if you opened port 80.
And also check /qmf/etc/qmf_release.xml if you alloweda all urls ( enforceWhitelist on 0)
Can you help me to do that please?

I assume it's not in my Firefox to open but with another program?
Toon 2 Rooted User
Firmware version: 5.94.7
Raspberry Pi 3B+
Domoticz 2022.1
10 Neo Coolcam PowerPlus
Domotica Beginner (need little help in beginning)
TheHogNL
Forum Moderator
Forum Moderator
Posts: 2125
Joined: Sun Aug 20, 2017 8:53 pm

Re: Toon is not opening on laptop

Post by TheHogNL »

Please follow this guide: https://ehoco.nl/rooten-van-enecos-toon-thermostaat/

If you can't figure that out either, please understand that rooting a Toon requires some linux skills and requires you to understand what you are doing.
Member of the Toon Software Collective
TerrorSource
Administrator
Administrator
Posts: 494
Joined: Thu May 04, 2017 9:28 pm

Re: Toon is not opening on laptop

Post by TerrorSource »

TheHogNL wrote:
witteherder wrote:Hello,

I did allowed in "Instellingen"- "Internet"- "Allow for 2 hours" and saved
I have the ip adres 192.168.2.20
If you followed the rooting guide you don't need to open the toon from the GUI.

Check your /etc/default/iptables.conf if you opened port 80.
And also check /qmf/etc/qmf_release.xml if you alloweda all urls ( enforceWhitelist on 0)
What do you want to do? You cannot open a website on the Toon to control the temp. You need to do that via http-api-calls.
mAiden
Member
Member
Posts: 330
Joined: Mon Jul 10, 2017 10:22 am

Re: Toon is not opening on laptop

Post by mAiden »

What you try is not much more than just a zwave page that you can not do much with.
What do you want? Maybe we can help you with it, on the right way :)
Member of the Toon Software Collective
aabre
Starting Member
Starting Member
Posts: 42
Joined: Sun Nov 05, 2017 1:26 pm
Location: Schiedam

Re: Toon is not opening on laptop

Post by aabre »

I fyou install the 'old' quby webserver on your Toon then is wil work just nice in a browser

viewtopic.php?f=102&t=11832&hilit=mobil ... =45#p86593
witteherder
Starting Member
Starting Member
Posts: 25
Joined: Thu Jan 10, 2019 2:28 pm

Re: Toon is not opening on laptop

Post by witteherder »

I want to control it wirh Domoticz
Toon 2 Rooted User
Firmware version: 5.94.7
Raspberry Pi 3B+
Domoticz 2022.1
10 Neo Coolcam PowerPlus
Domotica Beginner (need little help in beginning)
Post Reply

Return to “Toon external control”