TSC settings menu item

Everything about software tools, new software development and toolchains. For developers, mostly.

Moderators: marcelr, TheHogNL, TerrorSource, Toonz

Re: TSC settings menu item

Postby TheHogNL » Wed Nov 21, 2018 12:54 pm

Mixpower wrote:Any update on the price setting?
Or is it still not possible to change this?

Nope, this is much more work :-) don't expect it soon. Or help ;)
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 994
Joined: August 2017

Re: TSC settings menu item

Postby Mixpower » Thu Nov 22, 2018 1:57 pm

TheHogNL wrote:
Mixpower wrote:Any update on the price setting?
Or is it still not possible to change this?

Nope, this is much more work :-) don't expect it soon. Or help ;)

Okay, but where is it stored?
But I gather if you change it nothing happens?

Thanks!
Mixpower
Starting Member
Starting Member
 
Posts: 9
Joined: October 2018

Re: TSC settings menu item

Postby TheHogNL » Thu Nov 22, 2018 7:54 pm

Not sure yet. That's the problem i'm facing now.
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 994
Joined: August 2017

Re: TSC settings menu item

Postby atlantica » Sat Dec 01, 2018 8:49 pm

Hi TheHogNL

Thanks for all your good work on the TSC menu!

Is it posible to make a "tiles to display" selector in the Rotate menu setings?
Regards

David
atlantica
Starting Member
Starting Member
 
Posts: 33
Joined: March 2018

Re: TSC settings menu item

Postby TheHogNL » Sun Dec 02, 2018 9:16 am

atlantica wrote:Hi TheHogNL

Thanks for all your good work on the TSC menu!

Is it posible to make a "tiles to display" selector in the Rotate menu setings?


That would be a lot of work and hard to maintain within different firmware levels as Quby also constantly changes the code.
Currently it works by just rotating all tiles in page 2, 3 etc to the tile(s) in page 1. Is that not good enough?
Member of the Toon Software Collective
User avatar
TheHogNL
Forum Moderator
Forum Moderator
 
Posts: 994
Joined: August 2017

Re: TSC settings menu item

Postby atlantica » Sun Dec 02, 2018 4:46 pm

Perfect!!, but for now it also shows the tiles form page 1 when mode 1 is on....
Regards

David
atlantica
Starting Member
Starting Member
 
Posts: 33
Joined: March 2018

Re: TSC settings menu item

Postby edwin999 » Sat Dec 29, 2018 3:51 pm

Would it be an idea to add an option to enable experimental features?
I.e. enabling Smart Radiator Valves like described in https://www.domoticaforum.eu/viewtopic.php?f=97&t=12222 ?

I thought about this but it would enable inexperencied rooted-toon users to completly destroy the toon. Everything clickable in a GUI should be more or less user friendly :-)

But if you want to test with radiator valves in a toon2 I can tell you how to enable them. Just ask for it in that topic.
edwin999
Starting Member
Starting Member
 
Posts: 23
Joined: December 2018

Re: TSC settings menu item

Postby TerrorSource » Mon Jan 07, 2019 12:39 pm

edwin999 wrote:Would it be an idea to add an option to enable experimental features?
I.e. enabling Smart Radiator Valves like described in https://www.domoticaforum.eu/viewtopic.php?f=97&t=12222 ?

I thought about this but it would enable inexperencied rooted-toon users to completly destroy the toon. Everything clickable in a GUI should be more or less user friendly :-)

But if you want to test with radiator valves in a toon2 I can tell you how to enable them. Just ask for it in that topic.


The STRV feature is not yet fully implemented and/or tested. Has too much dependancies as marcelr mentioned in that topic. STRV's from different brands react differently while it should be all the same. Maybe that the Toon2 has only the z-wave libraries for a couple of brands but as there is no official announcement from Eneco/Quby it can only tested by trial-and-error which is not very user-friendly :)
TerrorSource
Member
Member
 
Posts: 271
Joined: May 2017

Re: TSC settings menu item

Postby edwin999 » Tue Jan 15, 2019 9:56 pm

Question: in "Toggle Native Toon Features" I disabled (Toon) Boiler Monitor App, however after a reboot "CV-ketel" is still showing in the app list.
Do you have any idea why this app is still there?
edwin999
Starting Member
Starting Member
 
Posts: 23
Joined: December 2018

Re: TSC settings menu item

Postby Erik007 » Sun Feb 24, 2019 1:46 pm

Hi, I don't know a lot about toon, so i think better to ask than to do something stu...
I have looked up the internet but could not find the answer to my question.

Get on screen: Er is een TSC resource file update beschikbaar. Update via TSC menu AUB
What does this mean. Can it do any harm. Can i reach toon afterwards. Thx
Erik007
Starting Member
Starting Member
 
Posts: 16
Joined: February 2019

Re: TSC settings menu item

Postby Toonz » Sun Feb 24, 2019 2:45 pm

Erik007 wrote:Hi, I don't know a lot about toon, so i think better to ask than to do something stu...
I have looked up the internet but could not find the answer to my question.

Get on screen: Er is een TSC resource file update beschikbaar. Update via TSC menu AUB
What does this mean. Can it do any harm. Can i reach toon afterwards. Thx

You can safely upgrade, this is our own version of the resource file for your firmware, including images used in custom apps.
It is not a firmware upgrade.
member of the Toon Software Collective
User avatar
Toonz
Forum Moderator
Forum Moderator
 
Posts: 1099
Joined: December 2016

Re: TSC settings menu item

Postby SDeath » Thu May 16, 2019 8:11 pm

I also received the message today that a TSC resource files was available, and to update via the menu.
I did but the Toon seemed to hang in the TSC menu.
After some pressing on the screen after 10 minutes or so, the Toon seemed to reboot.
So I thought fine, went outside to work in the garden. And when I came back after a few hours it was still booting.
Now it won't boot any more.
I can still SSH into the Toon, but it won't boot anymore.
I'll see if I can download the TSC resource file manually and upload it to the Toon.
I'm on 5.2.11 firmware.

Anything else I need to check?
Toon1 running firmware 5.2.11 (rooted)
SDeath
Starting Member
Starting Member
 
Posts: 42
Joined: January 2019

Re: TSC settings menu item

Postby SDeath » Thu May 16, 2019 8:18 pm

Ok so it seems like the resources-static-ebl.rcc was empty, after uploading the correct data and rebooting it started working again.
Very strange.
Toon1 running firmware 5.2.11 (rooted)
SDeath
Starting Member
Starting Member
 
Posts: 42
Joined: January 2019

Re: TSC settings menu item

Postby Hmmbob » Sat May 18, 2019 9:38 pm

How did you find out? I've updated the TSC file tonight as well, now my Toon is in a bootloop.
Hmmbob
Starting Member
Starting Member
 
Posts: 13
Joined: January 2019

Re: TSC settings menu item

Postby TerrorSource » Sun May 19, 2019 7:44 pm

Hmmbob wrote:How did you find out? I've updated the TSC file tonight as well, now my Toon is in a bootloop.


Try to run the update-rooted.sh script manually.
update-rooted.sh -v 5.5.7

It will re-install the latest firmware and packages and most likely will fix your issues.
TerrorSource
Member
Member
 
Posts: 271
Joined: May 2017

PreviousNext

Return to Toon software development

Who is online

Users browsing this forum: No registered users and 1 guest