Kernel panic while booting Toon

If your (rooted) Toon doesn't do what it's supposed to, post here. Dutch allowed / Posten in 't Nederlands toegestaan.

Moderators: marcelr, TheHogNL, Toonz

mAiden
Member
Member
Posts: 330
Joined: Mon Jul 10, 2017 10:22 am

Re: Kernel panic while booting Toon

Post by mAiden »

NLKris wrote:
NLKris wrote:What did WickedMaster do exactly? I think I might brik my Toon the same way and I just do not understand the unbrick post with webservers etc..

What happend: I did a factory reset, after that I made connection to WiFi so I could root and connect with ssh. When connected to internet the Toon started to download a update. I power off.
Than I started rooting, happend all fine. Than I started the update script witch told me it had to force to 5.2.11. After the download it needed a minute of two. After long waiting the script told me it could not start/finish the update.

So I did the script with -f, it worked..But still wanted to update from 4.20 to 5.2.11. Won't finish the last download part (I think). So after some reading I tried to open VPN, command "opkg update" and "opkg install base-qb2-uni".
Toon told me onscreen it had to reboot after an update. Rebooting in 8..7..6..5.... Anyway, it never rebooted. So I power of.

Than it never startup again. No SSH access. Looked up with COM poort and saw this:

Code: Select all

RedBoot partition parsing not available
5 cmdlinepart partitions found on MTD device mxc_nand
Creating 5 MTD partitions on "mxc_nand":
0x000000100000-0x000000180000 : "u-boot-env"
0x000000180000-0x000000300000 : "splash-image"
0x000000300000-0x000000600000 : "kernel"
0x000000600000-0x000000900000 : "kernel-backup"
0x000000900000-0x000008000000 : "rootfs"

Code: Select all

Kernel panic - not syncing: No init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[<c00273d0>] (unwind_backtrace+0x0/0xf0) from [<c029e720>] (panic+0x60/0x190)
[<c029e720>] (panic+0x60/0x190) from [<c00223dc>] (init_post+0x78/0xc4)
[<c00223dc>] (init_post+0x78/0xc4) from [<c0008b54>] (kernel_init+0x110/0x14c)
[<c0008b54>] (kernel_init+0x110/0x14c) from [<c00238ec>] (kernel_thread_exit+0x0/0x8)
I hope someone can help me trough step by step (of send me a very clear tutorial). I thank you already for the time!!
I've tried to make up a server myself, with linux, but I could not get it working. Is there somebody with a running server to get the Toon alive again? I could drive to your way and if needed I'll pay for the service.
I hope that somebody could help my Toon or have some golden steps to do it myself.
Can you connect with SFTP to you're Toon? Take the VPN keys from it? You will be find it in: /etc/openvpn . if you got lucky you will be find there a tar.gz file names like: eneco-001-0xxxxx.tar.gz
Save that thing to a save place...

Only way i think to get you Toon back a life is with NFS and TFTP.. But you need to know what you are doing with it :)
Member of the Toon Software Collective
Post Reply

Return to “Toon issues and support (Nederlands toegestaan)”