Neo Coolcam NAS-WR01ZE
Posted: Thu Mar 14, 2019 11:53 pm
Hi All,
Seems there are newer versions of this plug (i got them also) with new IDS. Seems to also have issues with domiticz due to new hardware ids.
see here: https://gathering.tweakers.net/forum/li ... es/1903090
For me would be nice to see what a config file looks like to see if i can get the power usage working.
Suspect here i can setup the power usage:
config_hdrv_zwave.xml
config_happ_smartplug.xml
for me its like this:
<device>
<package>hdrv_zwave</package>
<uuid>8932e00b-a2c7-4dee-bcb3-da2ab9ebe8d7</uuid>
<type>unknown</type>
<name>neo</name>
<internalAddress>6</internalAddress>
<visibility>1</visibility>
<profile>ConnectedState</profile>
<profile>NetworkHealth</profile>
<profile>Naming</profile>
<profile>SwitchPower</profile><ccList>5e 98 9f 55 73 86 85 8e 59 72 5a 25 27 32 71 70 6c</ccList><hardwareAddress>6</hardwareAddress><manufacturerInfo>
<manufacturerId>0258</manufacturerId>
<productTypeId>0200</productTypeId>
<productId>1027</productId></manufacturerInfo><zwavePlusInfo>
New ids also on the toon. Think then its also eneco who needs to update stuff or see the same trick for domoticz work here also if i can see a good example
Seems there are newer versions of this plug (i got them also) with new IDS. Seems to also have issues with domiticz due to new hardware ids.
see here: https://gathering.tweakers.net/forum/li ... es/1903090
For me would be nice to see what a config file looks like to see if i can get the power usage working.
Suspect here i can setup the power usage:
config_hdrv_zwave.xml
config_happ_smartplug.xml
for me its like this:
<device>
<package>hdrv_zwave</package>
<uuid>8932e00b-a2c7-4dee-bcb3-da2ab9ebe8d7</uuid>
<type>unknown</type>
<name>neo</name>
<internalAddress>6</internalAddress>
<visibility>1</visibility>
<profile>ConnectedState</profile>
<profile>NetworkHealth</profile>
<profile>Naming</profile>
<profile>SwitchPower</profile><ccList>5e 98 9f 55 73 86 85 8e 59 72 5a 25 27 32 71 70 6c</ccList><hardwareAddress>6</hardwareAddress><manufacturerInfo>
<manufacturerId>0258</manufacturerId>
<productTypeId>0200</productTypeId>
<productId>1027</productId></manufacturerInfo><zwavePlusInfo>
New ids also on the toon. Think then its also eneco who needs to update stuff or see the same trick for domoticz work here also if i can see a good example