Home Automation Domotica Forum Europe, Bwired Forum

Hello,

i have climate and boiler working in HA, but the smartmeter part just keeps giving NaN sensor values.
I use the code from cyberjunkie, but also tried m-Aiden his code and from some other GitHub contributors.
I now HA connects to the Toon, because i get a NaN value, if i connect with a wrong IP adress, i get no values (-).
In the logs i get no errors.

I've search the webs extensively, as well as this board, but found no apparent solution.
I hope You wizards can help me in my Quest.

Regards Freddie

Hello,

I have the same problem with Homeseer.
I use a script to rip the values from the PVoutput page.

Opbrengst nu 207 Watt
Opgewekte vandaag 2.403 Watt
Opgewekt deze week NaN Watt
Opgewekt deze maand 21.347 Watt

ED

Could you check if you can see the temperature via http://TOON-IP/happ_thermstat?action=getThermostatInfo
If so, the error is caused by the scripts or systems you are using.

that was a helpfull hint terrorsource, thnx.
It turned out that that url did work.

So i did something drastic.
Made a new test environment for Hassio.
And from a clean start i first added the rooted toon to the config.
To my surprise, that word flawlessly, also did the smartmeter an boiler worked in the first try.

So i builded a new Hassio instance round this config, added, tested, added some more tested again.
Until the point where i have now a fully working environment, with all the addons i want to use, and toon works like a charm.

No idea whatsoever why the other way around did not wanted to work, but it works now, that will do.

Thanks for the pointer.