For a little project i needed a module which can switch a relay using http requests, of course this is possible using a DIY combination with different products (raspberrypi + relay print) but it might not be stable enough for a non home setup. So i searched for a turn key solution and stumbled upon webrelais
They have several versions with inputs / outputs / counters but for now i ordered one with 16 relays and a nice little dinrail power supply
It is also possible to set the relays to pulse, when pushed they will close for a second and then fall back. This is a feature u can use for opening gates, windows or other pulse controller devices
[WEBRELAIS] Ethernet based relay / input board
[WEBRELAIS] Ethernet based relay / input board
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: [WEBRELAIS] Ethernet based relay / input board
Thanks for sharing.
Price is not too high.
They do look a bit too bulky/big to me though
Price is not too high.
They do look a bit too bulky/big to me though
HomeSeer - PlugWise - RFXComm - Philips Pronto TSU9800/9600/9300
Re: [WEBRELAIS] Ethernet based relay / input board
I picked it up at the shop this morning and they seem to be intended as a "turn key" solution which is working for me now. To bad there are no NC contacts on the output module so i need an additional relay which i don`t have at the moment
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
- Fantic
- Member
- Posts: 201
- Joined: Sat Feb 21, 2009 2:11 pm
- Location: Loenen, UT, Netherlands
- Contact:
Re: [WEBRELAIS] Ethernet based relay / input board
the 4 port version IPIO-4R4I-M has No/NC contacts and the 8 port version IPIO-8R8I-M has 2 NO/NC contacts.
Regards, Maarten.
Never let a computer know you're in a hurry.
Never let a computer know you're in a hurry.
Re: [WEBRELAIS] Ethernet based relay / input board
Too bad i got the 16 port relay module. But the additional relay and din rail housing is on its way and will be placed MondayFantic wrote:the 4 port version IPIO-4R4I-M has No/NC contacts and the 8 port version IPIO-8R8I-M has 2 NO/NC contacts.
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s