How to set the jumpers?

Forum about other Home automation topics which can not be categorized in any other forum. So this needs to be Home automation Domotica related! (otherwise use Off Topic)
Post Reply
Karell
Member
Member
Posts: 143
Joined: Sun Aug 30, 2015 5:11 pm

How to set the jumpers?

Post by Karell »

Maybe im stupid , but i cant get any house code when receiving the rf signal in rfxcom.

(the jumper on the screenshot is not right)its on 4.7m

Code: Select all

Packettype    = Lighting4
subtype       = PT2262
Sequence nbr  = 16
Code          = 755115 decimal:7688469
S1- S24  = 0111 0101 0101 0001 0001 0101 
Pulse         = 364 usec
Signal level  = 7  -64dBm
I put a jumper on 3,3m


thisd is info from rfxcom :
The PT2262 packets can be received in Lighting4 as a bit pattern but can also be received as an ARC On or Off packet if the PT2262 pins are configured as follows:
L=Low,
F=Floating (not connected),
H=High (not used)

Code: Select all

PT2262       A0  A1  A2  A3   housecode
             L   L   L   L    A
             F   L   L   L    B
             L   F   L   L    C
             F   F   L   L    D
             L   L   F   L    E
             F   L   F   L    F
             L   F   F   L    G
             F   F   F   L    H
             L   L   L   F    I
             F   L   L   F    J
             L   F   L   F    K
             F   F   L   F    L
             L   L   F   F    M
             F   L   F   F    N
             L   F   F   F    O
             F   F   F   F    P

PT2262       A4  A5  A6  A7   unitcode
             L   L   L   L    1
             F   L   L   L    2
             L   F   L   L    3
             F   F   L   L    4
             L   L   F   L    5
             F   L   F   L    6
             L   F   F   L    7
             F   F   F   L    8
             L   L   L   F    9
             F   L   L   F    10
             L   F   L   F    11
             F   F   L   F    12
             L   L   F   F    13
             F   L   F   F    14
             L   F   F   F    15
             F   F   F   F    16

PT2262       D3  D2  D1  D0
             L   F   F   F    ON
             L   F   F   L    OFF


Can anyone draw for me ?
Attachments
IMG_0764.JPG
IMG_0764.JPG (163.25 KiB) Viewed 4267 times
Donaties altijd welkom https://goo.gl/Fii2mo
Post Reply

Return to “Miscellaneous Home Automation topics”