Type interface

Forum about other Home automation topics which can not be categorized in any other forum. So this needs to be Home automation Domotica related! (otherwise use Off Topic)
Post Reply
phoenixb
Advanced Member
Advanced Member
Posts: 512
Joined: Thu Jul 23, 2009 1:00 pm
Location: Netherlands

Type interface

Post by phoenixb »

Hi,

I'm looking for some one that can help me with the next question, i have a PCB with a kind of bus communication (i think something over RS485) line on it (see picture) only i want to know if it's possible to monitor on this line.
Only i don't know what this is for kind of signal.
Knipsel.JPG
Knipsel.JPG (91.36 KiB) Viewed 10051 times
__________________
Merdeka
Member
Member
Posts: 65
Joined: Sun May 10, 2009 11:16 pm
Location: Netherlands
Contact:

Re: Type interface

Post by Merdeka »

Looking at the IC it's HBS.
datasheet.eeworld.com.cn/pdf/MITSUMI/15 ... MM1192.pdf
Home Bus System.. a japanese standard.

Not much that I can find on it really. Protocol information etc etc...

What's it used for? Air Conditioning or something?

Cheers,

Timo
phoenixb
Advanced Member
Advanced Member
Posts: 512
Joined: Thu Jul 23, 2009 1:00 pm
Location: Netherlands

Re: Type interface

Post by phoenixb »

Hi Timo,

That is correct it's for a AC unit.
And i want to try if it's possible to watch in that line.
__________________
ajn
Starting Member
Starting Member
Posts: 1
Joined: Sun Jan 25, 2015 3:55 pm

Re: Type interface

Post by ajn »

phoenixb wrote:i want to try if it's possible to watch in that line.
I know the question is a few years old, but it is possible to watch the data on the HBS line using an MM1192-based circuit and an Arduino. More information on the protocol, schematics and software to do so can be found on https://github.com/LenShustek/M-NET-Sniffer (Mitsubishi M-NET, analog circuitry) and https://github.com/Arnold-n/P1P2Serial (Daikin P1/P2, Arduino and MM1192 circuitry).
Post Reply

Return to “Miscellaneous Home Automation topics”